Search the forum,

Discuss he actually thinks this looks good!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
What a chimp.;

Thought my standards were slipping on this install open vent to a system boiler and unvented in loft .
bf020cb112de52fa8cff0c6a09fe1f2f.jpg
 
He looks lagged up for the winter himself...lol regards Turnpin:punk:
 
There is no sharp bends though! Oh apart from that elbow! What a tit.
 
Someone needs to tell the tool he's terminated it incorrectly, should be below the grid line to prevent wind chill freezing it, it's also ran more than 3 meters!!!!!
 
remember this is in 2011 so before we had the big freezes and all the new regs and machines we have now!! but still too long, terminated wrong and looks ****e!!!
 
remember this is in 2011 so before we had the big freezes and all the new regs and machines we have now!! but still too long, terminated wrong and looks ****e!!!

We still had common sense in 2011! Looks gash. And who did that making good?! No cement? No problem, I've got a box of decorators caulk!
 
Should have been a soak away all day long. I'm surprised the condensate isn't bored by the time it gets to the gully!
 
The severe winter was actually late 2010, - so before that video.
 
Done by a fkn clown.
It wouldn't be on my wall thats for sure
As Leo said should have been 1 1/2" dropping into a soakaway or done internally with a pump.
2010/2011 wgaf. There has been no change in the regs since the hard winter caught out all the numpties. It was always common sense.
Btw this is a bit snowIMG_2323.jpg I've seen 4" freeze solid up here caused by a dripping tap!
 
If thats an example of his work to the outside world I would hate to see the mess in the house.
 
Status
Not open for further replies.

Reply to he actually thinks this looks good!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
124
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
153
PSxxxxxx
P
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
57
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock