Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss G3 for 15ltr undersink water heater. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

shyguy2005

Gas Engineer
Messages
159
Any G3 guys on here.

Been asked to fit a 15ltr undersink water heater . But wanted to check so you need G3 qual to fit it?

Cheers
 
correct you do but dont need to notify building control
 

Reply to G3 for 15ltr undersink water heater. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
234
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
205
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
341
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
311
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
287
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock