Discuss Flue extension and adjustment - Gas Safe Engineer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
13
Hi Folks,

First post here so go easy please.

Can anyone add an extension to a gas flue on a combi boiler or adjust an extension or does it need to be done by a gas safe registered engineer.

Thank you
 
As above the only problem I can see if the boiler is old they may have stop making the flue/ not cost effective so the only way might be a new boiler
 
scott_d, I've been having issues with the vapour plume coming from a downstairs neighbours flue in the flat below me who has been using his mate on the flue. I very much doubt whether his mate is GS registered engineer.

Shaun, I appreciate all input but have you got the right thread mate?
 
scott_d, I've been having issues with the vapour plume coming from a downstairs neighbours flue in the flat below me who has been using his mate on the flue. I very much doubt whether his mate is GS registered engineer.

Shaun, I appreciate all input but have you got the right thread mate?

Yes but some times flue extensions / parts are not available so the only way if that would be the case is a new boiler

And if your having a problem with downstairs boiler have you talked to him about it ?
 
The boiler is only 17 months old. The guy downstairs says its compliant despite me telling him that when the wind blows in an unfavourable direction the vapour plume blows over our balcony
 
If the flue is compliant and your neighbour won't do anything then you have only a few courses of action.

1. Employ a gsr to check it out for you to ensure the flue position is compliant.
2. Move.
3. Get on with it. Worse things going on in the world.
 
The boiler is only 17 months old. The guy downstairs says its compliant despite me telling him that when the wind blows in an unfavourable direction the vapour plume blows over our balcony

Anything under 300mm to an open window/ most is illegal, but as you have said/ I feel there is nothing wrong except nuisance maybe but that's a stretch
 
Status
Not open for further replies.

Reply to Flue extension and adjustment - Gas Safe Engineer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
246
J
Hi all, I am a plumber but I do not carry out works to boilers as the majority of my is bathrooms so I am not gas safe. I have completed a...
Replies
1
Views
515
    • Like
  • Locked
Hi, I recently fitted a new central heating circuit and ran hot and cold to the bathroom and kitchen in my property (I was a CORGI registered...
Replies
0
Views
491
Had our gas Baxi Combi inspected and serviced today, as it has been every year. Gas safety cert issued and says all okay, but engineer gave what I...
Replies
4
Views
585
Hi. I have just qualified as a registered gas safe engineer I am keen to work with someone who is more experienced for the first year or so to...
Replies
0
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock