Fitting advice required for 30mm female thread

[Spigot]

Hello. What fitting do I need to connect an apparent 30mm diameter in/outlet, on a water pump, to 25mm MDPE pipe. It's on a DAB Jetinox 112M. Thanks in advance.

 

[ShaunCorbs]

What’s the water mains ? Tank ? Well ?

 

[Marc Bowers]

Hello. What fitting do I need to connect an apparent 30mm diameter in/outlet, on a water pump, to 25mm MDPE pipe. It's on a DAB Jetinox 112M. Thanks in advance.

View attachment 43349View attachment 43350

I’d suggest thinking imperial, it’s most likely 1.25inch. In which case I’d expect you need an MDPE 25mm x 1.25inch male adapter

 

[snowhead]

It's 1" according to DAB for everything between 82m and 132m, although they don't list a 112m, presumably an older model.

https://www.dabpumps.com/sites/default/files/2016-03/JETINOX_TS_ENG.pdf

1" has a major diameter of 33.25mm

https://www.pipefittingsdirect.co.uk/contents/en-uk/BSP%20Identification1.pdf

 

[Spigot]

Its to draw water up from a well. I think 1" bsp male x 25mm mdpe is correct. Thanks very much for the help and replies. Cheers.
[automerge]1586938672[/automerge]

I’d suggest thinking imperial, it’s most likely 1.25inch. In which case I’d expect you need an MDPE 25mm x 1.25inch male adapter

Thanks for the reply.
[automerge]1586938779[/automerge]

What’s the water mains ? Tank ? Well ?

Up from a natural water source.