Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss duo-tec 28 fault code e168 new PCB in the Central Heating Forum area at PlumbersForums.net
- Messages
- 34,367
- Solutions
- 2
Diverter not leaking into the motor ?
Reply to duo-tec 28 fault code e168 new PCB in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
We are from Alberta, and I own an electrical company.
I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Hi everyone,
Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it...
Newest Plumbing Threads
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 0
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 2
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0