Dishwasher inlet

[JanaH]

Good morning,

I'm struggling to remove my old dishwasher inlet.
It just won't come off.
Is there a trick to it or is it just stuck.

Many thanks.

 

[PlumbBobBob]

you need a pair of grips if it has been done up too tight, it just screws off.

 

[snowhead]

Or Nut crackers if you don't have any Pipe grips.

Thought'' Do people still have Nut crackers to break open nuts or does everyone buy shelled packed nuts?

 

[rpm]

Are you unscrewing the Brass nut from the valve or the White box?

 

[AlexGas]

Need to hold the isolation valve too, otherwise the lot will spin on that "T".

 

[JanaH]

Thanks very much every one.
It's all resolved now.
It just needed more force that we would want to initially use.

We had pliers but do own a nut cracker as well!