Discuss Core drill sets in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

wards

Plumbers Arms member
Plumber
Gas Engineer
Messages
444
what in your opinion are the best core drill sets?i have a set of norton at the moment but they are getting tired,and so are my arms using them,your recommendations appreciated:cool:
 
depends on budget i have marcrist but they are expensive and i mullered 2 on a wall god knows what it was made of
 
depends on budget i have marcrist but they are expensive and i mullered 2 on a wall god knows what it was made of
okay so if i go for these what price are we talking? the main size i use is for flues but buying a set works out probably cheaper:cool:
 
Status
Not open for further replies.

Reply to Core drill sets in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

So I bought my first flat recently (am in UK) and in a bit of a pickle as the bathroom has turned up lots of problems that weren't picked up by...
Replies
1
Views
730
    • Like
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical...
Replies
47
Views
5K
Hey all, looking for a bit of advice from people who have these brands or these particular sets. I am torn between either the ; MAKITA DLX2145TJ...
Replies
43
Views
8K
hi all need some advice on drilling a big hole :-) Need to fit a pipe for extractor in kitchen and the OD is 156mm. This is only a one time job...
Replies
5
Views
2K
I have a Vitra reduced height 75/108cm frame to fit a Vitra wall hung WC to. I also have a 550 x 210mm cabinet to fit around it. I have a few...
Replies
3
Views
2K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock