Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Compatible flush plates with Geberit UP720 (8cm) in the DIY Plumbing Forum area at PlumbersForums.net

Messages
20
Hello all,

We have a Geberit UP720 frame. The frame says depth 8cm. (There's also the UP320 frame, which I guess is 12cm.)

We are looking at Geberit flush plates, e.g., Sigma10. Sometimes we read that UP720 is compatible with Sigma flushplats. However, sometimes flush plats are also advertised as fitting "8 cm" or fitting "12 cm", but it doesn't seem to say "fits both 8 cm and 12 cm".

(edit) For example, Geberit WC flush control with electronic flush actuation, mains operation, for Sigma concealed cistern 12 cm, dual flush, with Sigma80 actuator plate, touchless - https://catalog.geberit.co.uk/en-GB/product/PRO_2159419 (116.090.SG.6) says "Geberit WC flush control with electronic flush actuation, mains operation, for Sigma concealed cistern 12 cm, dual flush, with Sigma80 actuator plate, touchless". So what frames is this compatible with? (This isn't a Sigma10, but the example is just for illustration).

Does anybody know whether the UP720 is compatible with all Sigma flush plates, or only with some? In particular, is the Sigma10 compatible with the UP720?

Many thanks!
 
Last edited:
Pretty sure all sigma plates will fit all sigma cisterns otherwise they would be a different name. The numbers I presume refer to cistern depth

I had issues with the colouring on some sigma plates a few weeks ago. I sent an email to [email protected] explaining what I needed and asked them for a phone call. They got back to me in a couple of hours with a technical rep and problem solved.
 
Pretty sure all sigma plates will fit all sigma cisterns otherwise they would be a different name. The numbers I presume refer to cistern depth

I had issues with the colouring on some sigma plates a few weeks ago. I sent an email to [email protected] explaining what I needed and asked them for a phone call. They got back to me in a couple of hours with a technical rep and problem solved.
Thank you - that's helpful. Have emailed them again just now. Though we had emailed that address before. I've suggested a call back as well.
 

Reply to Compatible flush plates with Geberit UP720 (8cm) in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

I was wondering if anyone would know if this Tavistock wall hung pan would be compatible with this Geberit concealed cistern . I know they are...
Replies
0
Views
969
Hi, I had a Duravit Sensowash bidet installed onto a concealed cistern, with Geberit Sigma 80 flush panel. I now have a problem that when the...
Replies
5
Views
2K
Ive a Geberit Sigma 40 dual flush plate with odour extractor. I replaced the carbon filter with new one after LED button flashed (instructed this...
Replies
0
Views
1K
I am in the process of renovating a bathroom, one job of which is to replace the broken flush plate that I have been putting up with for some time...
Replies
1
Views
907
Hi, first post... I have just had installed a UP320 cistern with geberit dual flush plate. When you go to push either button it does not move...
Replies
8
Views
5K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock