With a toilet fit to a concealed cistern vanity were the front panel slides up if you need access it at later date and fitting
Is it advisable to put a small bead of silicone between were the top of the pan sits against the vanity?
I need to adjust the large flush button because water continues to run after the cistern has filled up and the button does not return to its proper position, it stays depressed. The small flush button is working OK.
In which direction does the dual flush operating plate need to slide/be moved?
Hello, we were misadvised on how much a Lusso Stone cistern could be cut down (by both the architects and Lusso). The bathroom has been plumbed / tiled / had boxing out built and it is now apparent that the Lusso cistern is too high. We are urgently looking for a concealed cistern that is...
Hi all
Relatively inexperienced homeowner here. Apologies in advance if I get any terminology wrong.
Today I noticed some limescale accumulation on/around the grout between the floor tiles next to my toilet. I realised that the grout line right next to the toilet was in fact wet to the touch...
See attached pics of this cistern
this is a VP slimline concealed cistern
can you please tell me what I have here . . .
The part that has come apart does not look like the coupling parts in the VP 'how to fit' pdf file. I would much appreciate advice on how I get the current plastic ring...
I have a Geberit concealed cistern . This has a dual pneumatic flush, and has worked without any problems for a few years now. The short flush continues to work normally but the longer (6 litre) flush no longer flushes fully which results in solid waste not being flushed. I have checked the...
Hello,
Getting some work done in my downstairs WC and my installer and given me a list of products to buy with some recommendations.
We are replacing the exposed cistern toilet with a hidden one. It will be a back to wall, floor standing pan with a shelf above it to put stuff on. I've been...
We have model number FL2026 concealed cistern - picture attached. The system is not working when pushing via the buttons on the plate. It used to work when we push directly after removing the plate. Even this has become hit and miss now - specially with the yellow button.
The pins (used to...
Hi all,
I was just posting on here to see if anyone has had anything similar or can point me in right direction…
I have a Geberit concealed tank within the wall so a floating toilet and over recent weeks have found that the brick work just outside of the toilet area (downstairs toilet) has...
Hi all.
We have a 2013 Better Bathroom wall mounted cistern. The inlet valve (?) on the left side has been dripping and - we think - overfilling the cistern so it then leaks through a joint in the cistern. Picture of the valve unit is below.
My question is whether there is any way to track...
I’ve got a vantage concealed cistern that had an intermittent problem a couple of years ago whereby the flush wouldn’t shut off and it continuously overflowed into the bowl. As it was a new build I had the builder send a plumber round to resolve the issue.
That worked until recently when it...
I am having a wall hung toilet installed in an upstairs bathroom. The toilet will be built into a wall which will be 780mm tall. There will be a 10mm thick piece of wood stuck on top to give a total height of 790mm. This built out wall will protrude 220mm from a brick party wall.
I have found...
I have a concealed cistern in a 20 year-old house. It is the old syphon type, and over the last couple of months it has started to have an intermittent problem.
It seems like the siphon washer/diaphragm is failing, and sometimes it's hard to get the siphon to start, and it takes repeated...
Due to lack of flush took out the syphon and found membrane split. So sorted out a new one Viva Skylo Dual Flush Syphon - https://www.toolstation.com/viva-skylo-dual-flush-syphon/p51299
Not having come across a toilet like this before, been cobbled together by some bodger 20 yrs ago.
In the old...
What's everyones top choice for a dual flush concealed cistern? It's going into a 600 by 400 unit with access through the dummy drawer front. The toilet will be a wall hung on a low height frame.
The reason I don't want a combined frame and cistern is because the huge flush plates will not fit...
Anyone know which cistern to use in a 500 calypso unit, needs to be serviceable from the front as fixed worktop above (ps I don’t like Dudley Niagara!)
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.