Search the forum,

Circulation pump head and base opp direction

Post new thread

Discuss Circulation pump head and base opp direction in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

trusty

Messages
11
hi,

Just about to fit my welo replacement pump and realised the head and base have conflicting arrows?

What one is correct?

It’s not a new erp, it’s and old style If makes any difference.

Appreciate any help, thanks!
 
Status
Not open for further replies.

Reply to Circulation pump head and base opp direction in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
147
John.g
J
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
291
John.g
J
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
249
exedon2
exedon2
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
207
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
Plumbing Advice
TilersForums.co.uk | UK Tiling Forum - Est 2006
Electrical Blog
Tiling Advice Live
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock