Search the forum,

Discuss Central London stockist of PORSADRILL diamond core tile drills for hard porcelain. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
3

365drills

http://*********.com/jpgs/porsadrill_logo660.jpg​
http://*********.com/shops/E-K-Wilson/a7.jpg​
E. K. Wilson of London is a prefered stockist of PORSADRILL diamond core tile drills. If you need ********* core drills in central london then head on over to see E.K.Wison. SW7 3LQ
http://*********.com/shops/E-K-Wilson/a6.jpg​
Call 020 7589 0046 and ask for Sandy. 86 South Kensington OLD BROMPTON Road near Knightsbridge
http://*********.com/shops/E-K-Wilson/a1.jpg​
E. K. Wilson of London is a prefered stockist of PORSADRILL diamond core tile drills. If you need ********* core drills in central london then head on over to see E.K.Wison. Ask for Sandy 020 7589 0046
http://*********.com/shops/E-K-Wilson/a3.jpg​
http://*********.com/shops/E-K-Wilson/a5.jpg​
http://*********.com/shops/E-K-Wilson/a8.jpg​
If you can find Lamborghini London you will find PORSADRILL at E K Wilson​
http://*********.com/shops/E-K-Wilson/a2.jpg​
http://*********.com/jpgs/tile_drill4.jpg​
[h=1][SIZE=+1]SW7 3LQ[/SIZE][/h]
********* Diamond core tile drills
 
Status
Not open for further replies.

Reply to Central London stockist of PORSADRILL diamond core tile drills for hard porcelain. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
262
Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
73
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
193
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
241
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock