Search the forum,

bristan monobloc mixer tap

Post new thread

Discuss bristan monobloc mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

alex815

Does anyone know how to dismantle one of the the 1/4 turn valves so that I can replace the ceramic discs
 
Status
Not open for further replies.

Reply to bristan monobloc mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Bristan Taps Rigid Tails Instead of Flexi
Hi, As I need to purchase two new taps for our en suite, I've noticed that almost all taps now come with flexi tails as standard. I've read some horror stories about these bursting / leaking so would prefer rigid fixings like the existing ones they are replacing. I'm looking to purchase this...
Replies
2
Views
305
techweb
T
B
Dripping tap in my kitchen
I have a kitchen mixer tap with quarter turn levers and the cold side started dripping. I took out the ceramic valve and replaced it with one from Screwfix but it hasn’t solved the problem it still drips. Could it be a dodgy valve or is it something else? Thanks
Replies
5
Views
454
Belxvs
B
S
Dripping tap despite valve replacement
I have a Bristan Manhattan mixer tap in the kitchen. Five years ago, it started to drip. I replaced the valve in the cold water side and the dripping stopped. Recently it began to drip again and I replaced the valve again. But, it still drips sometimes. I’m trying to replace the valve on the...
Replies
1
Views
408
Ben-gee
B
L
Mains supply to mixer tap is pushing cold water to hot water pipe
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
609
LordWest
L
S
Help identifying a Bristan Shower
Hi All As you can see from the attached pix, the flow control knob on my Bristan shower has broken. It was installed before I bought the house (possibly between 2015 and 2017) but I've no idea what model it is. Firstly, can anyone help me to identify it to see if I can get a replacement knob...
Replies
1
Views
257
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

BS 5389 Tiling Standards
Tilers Forums UK
Tiling Advice
Tiling Forum
Electrical Forum for Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock