Boss adapter

Post new thread

Discuss Boss adapter in the USA area at PlumbersForums.net

S

Serval

Messages
120
Anyone know the correct name and where i can get something like this boss adapter on the right?
DSC_3672.JPG

Its solvent welded to the boss but is push fit to take 50mm pipe

Could use one of the rubber push in type but not sure how reliable they are
 
Last edited:

Reply to Boss adapter in the USA area at PlumbersForums.net

Similar plumbing topics

B
What would this odd 22mm-32mm adapter be known as?
I have a CH boiler installation with a nice simple vertical condensate drain, down and out through the wall to a pipe outside. All is as it...
Replies
8
Views
510
ShaunCorbs
ShaunCorbs
S
Advice on old Osma soil pipe boss
Trying to connect up new 40mm waste into the old soil stack (which would be an absolute pain to remove), it's all Osma pipe, from the 70s...
Replies
10
Views
1K
Timmy D
T
B
How should condensate drain connection be made at top of downpipe?
[ASIDE: I did wonder if this was the best forum for this but figured as it was a boiler related issue that the gas engineers would be dealing...
Replies
5
Views
285
Bordonbert
B
J
Connection to Boss Pipe Leaking
Hi all, hoping you can help me. I have a leak where the bath waste pipe connects to the boss pipe. Not sure if its a push fit or pipe weld type...
Replies
12
Views
1K
rpm
rpm
S
Boss adapter markings
I think the markings on this boss adapter are to make sure its installed with the correct fall but im not quite sure what the makings mean and how...
Replies
4
Views
1K
Serval
S

Newest Plumbing Threads

Back
Top