Best way of reducing rad. Valve to 10mm

[ShaunCorbs]

Yes but taken 15mm ish off the top

 

[Matt0029]

I struggled cutting with a cutter as have nothing to hold back on

 

[ShaunCorbs]

A point nose pliers on the bit your cutting off etc

 

[Matt0029]

These wouldn't reduce the flow if used

 

[Ben-gee]

Don’t worry about the flow, the big restriction is in the valve.
Any of the above methods are fine, it’s just about the aesthetics- which to be honest will be overlooked within a few days !!

 

[Matt0029]

Don’t worry about the flow, the big restriction is in the valve.
Any of the above methods are fine, it’s just about the aesthetics- which to be honest will be overlooked within a few days !!

Thank you