Search the forum,

Any hive experts ....

Post new thread

Discuss Any hive experts .... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Riley

Riley

Super Moderator
S. Mod
Plumber
Gas Engineer
Subscribed
Messages
10,855
I have a customer who is having a completely brand spanking new heating system put in but they were gifted a hive thermostat as a housewarming gift and I really want to use it in the in install.

I make no apologies for never having fitted one as I prefer other brands but I am confused with their capabilities. I went on their live chat last night with a couple of their “experts” Who were adamant that the thermostat only had frost protection but no weather compensation option. This didn’t sound likely to me what with boiler plus but they’re the experts. Is this right and if so how does one attach weather compensation do they offer something compatible.
 
It’s load comp well that’s what they claim etc for it to pass boiler plus

It’s live in live out
 
I thought weather compensation was a must have? This is why I like the V-smart and MiGo
 
scott_d said:
I thought it was boiler plus from optimisation and being smart - learning your routine, heat up tunes etc.
Click to expand...

Yea eg load and no learning routines etc isn’t boiler plus approved
 
Already compliant just fit hive
 
Yeah I know I thought that more was required to make it boiler plus. I realise the actual thermostat is
 

Reply to Any hive experts .... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
Lou
Lou
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
252
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Blog
Electrical Forum for Electrical Advice
Tilers Forum
Electricians Talk
Electrical Advice | Electricians Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock