Search the forum,

Discuss Air lock on hot water circs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Andyh

Gas Engineer
Messages
34
hiya fellas and gals ...
Any one got a genius idea to remove air lock from 28 mm gravity circs...
I've bled the air valve on circs it's just water... was thinking connect hose pipe upto mains and backfill.. not what a customer advised and hit it with hammer :(
 
hiya fellas and gals .
Any one got a genius idea to remove air lock from 28 mm gravity circs...
I've bled the air valve on circs it's just water... was thinking connect hose pipe upto mains and backfill.. not what a customer advised and hit it with hammer :(

The right answer is to run the pipework properly so it naturally vents.
 
Of course you can. Tell the Landlord I said it. I was going to suggest the same as Shaun and Simon but it could go very wrong. It could also (if it's Primatic) cause days of orange water.

That's why I worded it differently :D
 
Temporarily remove a convenient radiator on the affected circuit. Connect a circulating pump (and, if you've got one handy a magnetic filter) across its connections. Run the temporary circulating pump until everything is working. Bleed radiators. Remove temporary pump, replace and bleed radiator.
 
upload_2018-11-28_22-38-47.png

OH NO!
IS THAT YOUR CUSTOMER?
 
Thanks fellas ,, I considered ripping up two bedroom floors to correctly realign the circs :eek: however tried to boil it out for about an hour then back filled it from mains .. not sure which way cured it but it seemed to be sorted thanks for those who offered useful comments :)
 
Thanks fellas ,, I considered ripping up two bedroom floors to correctly realign the circs :eek: however tried to boil it out for about an hour then back filled it from mains .. not sure which way cured it but it seemed to be sorted thanks for those who offered useful comments :)
Why the big red X disagree???
That's the first I have been given and I don't know why.
If it's a joke, kindly remove it.
 
:D
 
I have a BAXI SOLO 30 HEA.and gravity system cen. heating. The red ignition lockout light is coming on now and then together with flashing green lights for electric feed and main burner on.Have already replaced grundfoss
pump, flue seal, temp. sensor. Any idea whats wrong?
 
I have a BAXI SOLO 30 HEA.and gravity system cen. heating. The red ignition lockout light is coming on now and then together with flashing green lights for electric feed and main burner on.Have already replaced grundfoss
pump, flue seal, temp. sensor. Any idea whats wrong?

How can you have a Gravity system with that Boiler?
Are you Gas Safe Registered?
 

Reply to Air lock on hot water circs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
353
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
145
We have hot water, tank for hot water why is the hot water boiling hot from tap,and shower, We are on a schedule for hot water via our hive app 2hrs in morning 2 hrs in evening Any help be much appreciated
Replies
4
Views
103
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
209
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
147
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock