You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
1/2" bsp
British Standard Pipe (BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external (male) thread with an internal (female) thread. It has been adopted as standard in plumbing and pipe fitting, except in North America, where NPT and related threads are used.
Hi All
Looking to replace this so i have a standard threaded end outdoor tap, looks like they have managed to fit an indoor tap outside as is?
Will a standard 1/2" outside tap like this screw on where the union is?
https://www.NoLinkingToThis/p/outside-tap-with-double-check-valve-15mm-x/37241...
Afternoon, all.
Currently have proprietary diverter valve on shower riser with handheld outlet standard 1/2" BSP male and inlet also 1/2" BSP male. The outlet to overhead shower is custom female fitting and feeds a larger diameter chrome covered plastic pipe feeding large and inefficient...
Am I missing something obvious?
Trying to fit 1/2" BSP Radiator Air Vent but there's nothing much to get hold of to tighten. Can grip last thread with pliers, but that means I can't then tighten it all the way home.
I've used ptfe string on the thread. There was a odd drop leaking (at 2.5 Bar)...
Hi!
I was wondering if someone could point me in the right direction on something please as I have no experience with plumbing....
I am fitting a ball valve tap to a stainless steel stockpot for use in brewing beer but inside the pot I will need to connect a piece of 15mm copper pipe which...
I've started a discussion at- http://www.ukplumbersforums.co.uk/plumbing-forum/21292-shower-pipe-sizes.html#post155539 - regarding shower pipe sizes and fittings, I didn't realise there is a seperate Fittings & Pipe forum.
Any way I want to connect a 15mm x 15mm full bore isolating valve to...
Is there such thing as a flexible braided hose that will go from 15mm pipe (plastic in this case) to 1/2" male thread? If so, where would I get some as I've not seen them anywhere.
I have some bath wall valves that have female 1/2" BSP threads for the input and output flow. I was hoping to...
Hi
Excuse the noob question. However, I occasionally fit showers as part of my work. There seems to be no "standard" way of fitting them - when they are in the wall. The general method that the plumbing shops seem to tell me is to use 1/2" wall plate adaptors, then screw them to a bit of...
pt44
Thread
1/2" bsp
blank
bsp
cold
fitting
fittings
fix
green
hot
plumbing
screw
seal
sealed
showers
taps
test
tiling
video
wall
washer
work
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.