Search the forum,

Baxi duo tec 24he mk1

Post new thread

Discuss Baxi duo tec 24he mk1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

king of pipes

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Anyone know if these are available as a spare ? Can't find one anywhere merchants no use has 2 similar but not right . Cheers kop

20181027_101628.jpg
 
Your missing the other half normal stuck in the brass block best to replace the whole thing
 
correct pair of point nose pliers and pull or replace the whole brass block
 
Sorted it chaps had to strip out the brass block and knock the broken bit back through the other way , fitted the new one all back together boiler kept overheating in hotwater mode grrrr drained again plate out was blocked not solid but enough to play up luckily I managed to clean it enough with a pressure washer so up and running again . Cheers kop

20181029_150108.jpg


20181029_144957.jpg


20181029_144952.jpg


20181029_164315.jpg
 
Had another one today two in a week hmmm was under warranty but sorted it as i fitted in 2016 and was due a service i did get baxi to send me a replacement cartridge though. Kop

20181031_150311.jpg


20181031_153558.jpg
 
Yep they go for fun
 
No mate didn't fit the 24kw that was 2006 , sentinel x100 stickers on the boiler , 28 erp I fitted adey pro 2 and adey chemicals 2016 this one was clean very little black on the magnet hardly any when I serviced it . Kop
 
This one was brass though Shaun heat creeping into heating when there was a demand for hot water it's on the drop down flap didn't look anything wrong with it but swapped it and that sorted it
 

Reply to Baxi duo tec 24he mk1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
189
ShaunCorbs
ShaunCorbs
J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
294
John-sjw
J
M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
645
John.g
J
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
132
Stigster
Stigster
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock