Ordered a rip off makita drill a while back and used it for the first time today, its solid and performs better than my apprentices ryobi so if anybody is on a tight budget figured this might help you out. Just be warned it took ages to get here as the company ships them from china, they're...
Hi guys looking at upgrading the van and am looking at putting some sort of inverter set up in place. Now I know nothing about these other than I know pure sine is less likely to damage whatever is plugged in. Does anyone have experience of these at all?? Literally JUST looking at it recharging...
Hi everyday peeps,
I need to correct a mistake in the heating system in my dad's flat which has two radiators connected with flow in at bottom and return from the same end at the top. Nothing wrong with TBSE in the right setting, but best not to have the flow and reversed messed up!
Easiest...
Merry Christmas boys and girls. :)
Thanks for all those who joined in the Christmas fun over the past few weeks.
Today's question is; What's the date you're going back to work?
Today's winner will get:-
An Amazon Food Hamper courtesy of Plumbase.co.uk (@Plumbase - Thank you!)
Please...
Looking to buy some Extra Deep Sockets for use on taps instead of box spanners..The fixing bolts on the taps in my house are 8mm and 10mm, so I was wondering what are the other common sizes? Trying to decided whether to buy a full set of if I only really need a couple?
Looking to get one of these for a while and just got a job that's perfect for it to save me a fat drain down on a very old property, which one do you guys who use them rate, this place has 28mm return so ideally something suitable for that. Cheers.
Replacing 15 x stopcocks @ 22mm thought I'd try cutters as usually I pull 'em and space was tight.
These Ox brand 22mm cutters just deform the olive and score the pipe.
The jaws don't close properly as witnessed by the burr where the handles meet (pictured) preventing cutting of the olive.
Cost...
Armeg jaw droppers. I hears good things and I like a new toy. But both the machine screws on one of them that hold the sliding jaws wouldn't bite and stay in place - no matter how hard I tightened them. Resorted to a fibre washer.
Hopefully things will improve.
Didn't get the nerrad as too many...
Hi,
I after opinions on which M Class dust extractor is better for coreing holes when using a dust extraction adaptor. I have narrowed it down to either the Bosch GAS35 AFC or the Metabo ASR35.
Any one used them both?
I need such a spanner to remove a failed IH, and to install a replacement; in a domestic hot water cylinder made by Opus (Cyprus).
I am aware that in general the distance across the flats may vary somewhat from brand to brand, despite all having 1.5" BSP threads.
In my case, both old and new IH...
Hello all our university is doing a project to build a rocket engine, we would need somewhere where we could learn how to choose the fittings, valves, fuel lines, and what attributes each have. we will be using two propellant to feed the engine the first one is liquid oxygen which is a cyrogenic...
Just looking at various 22/15mm secondhand benders and notice many come without guides.
Are guides generally interchangeable between different brands or are they specific to a particular brand/model?
In use, is there any difference between alloy and steel guides ie is one type considered...
Hi there
I just bought a Novopress ACO103. I attached a picture of the machine and the jaws. Can someone tell me what fittings can be used with these Jaws? Im new to press and these seems to be alot of different names. Connex banninger, m press, v profile etc
Any help you can and links would...
I'm thinking of getting a Stud Finder, so that when I drill or nail something into a wall at home, I don't puncture any pipes, wires etc.
I heard that cheap ones aren't good, not sure if this is true.
Any recommendations would be very welcome 😉
Just a heads up pretty cheap for 250ml
https://www.ebay.co.uk/itm/Loctite-577-50ml-250ml-Fast-Cure-Medium-Strength-Pipe-Seal-fast-shipping/352877949177?pageci=66774372-c39b-40e9-9b61-2f00496a6e85
Hi,
Hope you can help with a central heating issue. I tried turning the central heating on today but without success. The orange light that usually comes on when the heating is triggered isn't illuminating - I've tried the once, twice and fully on modes and it doesn't come on in any of these...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.