Search the forum,

Discuss Advent Calendar - DAY 24 - Merry Christmas People :D in the Plumbing Tools area at PlumbersForums.net

Status
Not open for further replies.

Dan

Administrator
Staff member
Admin
Messages
2,782
Merry Christmas boys and girls. :)

Thanks for all those who joined in the Christmas fun over the past few weeks.

Today's question is; What's the date you're going back to work?

Today's winner will get:-

Goodies are being posted out in the new year so we don't have to keep running the post office before Christmas. Took me an hour to collect a letter the other day, which turned out to be a Christmas Card from a local clothes shop who didn't stick enough postage on it!!!!!

Look out for the Valentines comp where we're hooking up a couple of lonely members :D (I jokes!)

Worth checking out the Electricians Forums Day 24 Thread and Gift! (A GoPro-like 4K Camera, kit and case, courtesy of Electrical2Go.co.uk)


And also the Tilers Forums Thread



You can compare the trades then, see which one has the most time off over Christmas. :D

Cheers,

@Dan, @Lou, @ShaunCorbs, @Plumbase
 
Booked one in for Monday 30th December, but the probably 6th January back good and proper.
 
Planning to go back in on the 07/01/20 when the kids go back. But I always get called out in between. Then skiing in feb. #veryexcited
 
Not quite sure as off looking after Mrs after her new knee replacement.......wishing all forum members and staff not forgetting The awesome Sponsors for their generosity a Happy Christmas and a Happy Healthy and Prosperous New Year.......Festive regards Turnpin
 
6th of January officially but I’ve got a small job on the 27th December
Merry Christmas everyone
 
Self employed so 27th, unless I can think of a good reason to skip work ;) the boss is pretty good. 😂
 
8th of January is when I’ll be back at the tools but probably 26th on the laptop figuring out who, when & where. But that will be at home helping to defeat vast quantities of food & drink as we seem to have emptied the local supermarket into our house.
Happy Christmas & New Year with a prosperous 2020 to you all.

Regards

Arthur
 
The winner of the Christmas Eve advent Calendar is



@JKG


Super congrats - please message me your address :)
 
Status
Not open for further replies.

Reply to Advent Calendar - DAY 24 - Merry Christmas People :D in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
151
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock