Hi I just had installed a new Bosch series 4 pgp6b5b90 gas hob. See attached videos of it turned on. It seems there's a lot of gas coming off it. Is this normal?
Would love some advice please:
I had 4 radiators replaced in September as part of a kitchen refit. This included new copper piperwork behind the walls where the Rads are placed. The system wasn’t flushed or anything, just installed and the plumber left.
A few weeks later we noticed that our...
Hi, we have a Clyde CK5 gas boiler with a Reillo burner.
On the front of the boiler it has, as in the photo, the boiler temperature setting on the left, and the shunt pump temp setting on the right.
On the right there is the boiler temp gauge.
Set as it is in the photo, the boiler...
hello plumbers forum, I am an ex web page designer and graphic designer requesting some help with my portfolio, need a couple of boiler/cooker installs for my portfolio, in exchange will also design your web or do the branding for your company or yourself(letterheads, business cards, invoices...
hi, I am after some advice, I recently fitted a new gas valve to a vaillant ecotec earlier. the boiler was fitted in 2015 and has been serviced since
anyway I put my analyser in the combustion side of the flue and the readings were extremely high, something along the lines of
CO ppm —OR—...
Hi all,
I am thinking to set boiler when we are on holiday soon this winter.
First, I want to turn off the cylinder (hot water tank) handle (please see attached photo arrow pointing), this way the house will no water flow at all, this is to prevent water/pipe leaking/burst which happened last...
ecotec pro 24, the display screen goes blank after about 10-15 seconds and boiler is completely dead. isolate it for a couple of mins and it comes back on and repeats.
dont do much on these, so is it the board, or will a dodgy component do this to the board?
Im thinking the fan, so pump runs...
Evening all,
So I had an eventful day yesterday, was asked to replace some floor boards as they had rotten out, set my depth on my circular to 20mm just about 1mm more than needed, on my first cut I managed to nick two heating pipes and the gas pipe.
After isolating the gas rather quick and...
Hi all,
Recently our house central heating always turned on in the morning (and in the evening of course), but this morning, Saturday, we got up late without turning it on yet, about 9:20ish I heard the pump was making noise! About 9:29ish the noise stopped.---This is to say, boiler not turned...
Can anyone give handy advice for pricing repair jobs, please? Do I add a % on parts? What about a PRV that's hard to get to? Do you take the difficulty into consideration?
Appreciate any advice
Hi
I've recently qualified as a gas engineer , for the time i was training at the college , i was working as a apprentice for about 6 months. For these 6 months i was assisting on many types of jobs including basic plumbing jobs like gas runs, taps and toilet installs but majority focused on...
Hi I’m looking for any gas engineers vacancies in the north west if any engineers/companies can help me out.
I have just completed an Managed Learning Program gas diploma and have passed my ACS for CCN1 and CENWAT with Hybrid Technical Services in Aintree Liverpool that I funded myself. I will...
Hi everyone,
My Ideal Vouge Max 26 was installed a few years back, all works fine. Its an S plan setup, but I've always been amazed that the temperature for the water tank and the central heating were the same and 'couldn't' be separated (according to the Ideal registered plumber who installed...
Hoping someone can give me advice with this one. At an annual gas service today I found a Worcester Greenstar Junior 28i to be using only running at around 12kW on high when carrying out the gas rate. The CO readings were where they should be, fan speed was okay and inlet working pressure was...
Hi all,
My customer needs a new water heater/boiler - preferably electric. (Getting the gas pipe through to the desired location is a bit of a no-go. It's a tiny stone-walled, screed floored terraced cottage, with no easy route for the gas pipe. So we're looking at electric options).
Two people...
Hi all
Had my old baxi 105 replaced with a baxi 630. Got the ifos fitted and set to curve 40. So far all ok. My controls are a salus iT500. Now I realise this is not opentherm compatable, so is worth upgrading to an opentherm smart thermostat to work along side the weather compensation ??
I...
I currently work in an office job on mid 20's salary and hate being chained to the desk.
Looking for a career change to become a gas and heating engineer.
I have came across various courses which offer retraining such as the below...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.