Zoning

Post new thread

Discuss Zoning in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Is anyone actually doing it in your average existing three bed?
 
Not on boiler swaps, if new rads and pipework yes. But as you say loads of idiots under cut u, who have no idea. My favourite is trvs replace need for interlock !
 
Part P....possibly the most boring day of my entire life...........
 
New posts
Status
Not open for further replies.

Reply to Zoning in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

MarkWillGreen
Add underfloor to S-plan - S-plan+? closely spaced tees? new boiler?
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
2
Replies
16
Views
1K
John.g
J
P
Replacing Heatmiser UH2 with updated model
Hi all, I have a Heatmiser UFH installation, 7-8 years old now. This week we noticed that a few of our heating zones were not warming up, even...
Replies
1
Views
1K
pjlewis
P
C
    • Like
Grundfos Alpha Pump replacement
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Replies
8
Views
676
Clockdoc
C
J
How can I figure out what's best for my house?
I live in a large 3 bed semi with a Potterton Profile 60e - so it's a G rated boiler. I wish to improve the energy efficiency of the property...
Replies
3
Views
620
ShaunCorbs
ShaunCorbs
T
Advice on new system
Hi all, sorry about the long post but a novice here looking for some advice... I've just bought a 12 bedroom private house with 3 bathrooms that...
Replies
3
Views
572
Chuck
C

Newest Plumbing Threads

Back
Top