You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
heatmiser
Heatmiser was an American rock band, formed in Portland, Oregon in October 1991. Consisting of Elliott Smith (guitar and vocals), Neil Gust (guitar and vocals), Brandt Peterson (bass; later replaced by Sam Coomes, frontman of Quasi) and Tony Lash (drums), they were known for their well-crafted lyrics and songs often featuring the juxtaposition of melancholic and cheery words and melodies. The pop-oriented songs of Elliott Smith were a contrast to the darker songs of Neil Gust, while both Smith's and Gust's songs touched on subjects such as anger, alienation, loneliness and despair.
Hi guys. Just bench testing my wiring centre. It all performs as it should but the relay makes a bit of a racket while it's waiting for the valves to open before it calls for heat. Only does it on a UFH zone, if using the rad zone its silent as I guess as it's not delaying/activating the pump...
Hi all,
I have a Heatmiser UFH installation, 7-8 years old now. This week we noticed that a few of our heating zones were not warming up, even though the thermostat was showing the flame symbol. They were working fine last winter. I knew from when I looked at the installation in the past that...
All.
I hope you can help. I have an Intergas HRE 30 SB boiler (plus tank) which is driving a combination of (downstairs) UFH plus (upstairs) rads, all controlled using a combination of Heatmiser NeoStats (UFH) and NeoAir w/ RF switch (rads).
On the surface, the Heatmiser App suggests there are...
I have a Heatmiser UH8-RF controlling my underfloor heating, connected to the NeoHub with three zones with NeoStat v1 thermostats.
This is about 3 years old now and when setup everything was installed worked fine. All the main current functions work - I can control the UFH with the app and it...
I have Heatmiser slimline thermostats installed in most rooms which have water uhf zones. They work fine but I’ve always thought the current temperature reading was a bit off. I confirmed this today by placing a few internal room thermometers in various places and it appears the Heatmisers are...
Hello,
I replaced a Heatmiser Neostat V1 (stopped working) with a Neostat V2 for my Vaillant ecoTec plus 637 boiler, using it as a timer to turn the central heating on. It was a direct replacement of the ‘front’ unit without any change to the existing back plate or wiring (I am neither a...
We've just moved into a house where there is underfloor heating in the lounge. It's not a big lounge yet there are 2 x Heatmiser PRT-WTS controllers - one for the front and one for the back.
The Heatmiser controllers no longer work (Heatmiser say they're too old and I need new ones) but they...
Just moved into a house with 5 heating zones, 4 of which are underfloor and connected to a Heatmiser UH2. The 4 UFH zones each have a thermostat - one old dial type and 3 Heatmiser Slimline programmable stats.
A few teething problems with a zone valve fitted the wrong way round but generally...
Boiler is a Viessmann 100-w (2021 version)
heatmiser uh8-rf
heatmiser rf switch (intended for boiler enable only)
Heatmiser neoair thermostats
I live so far north that there isn't a Viessmann installer local to me, however after speaking to Viessmann my local heating engineer was placed on a...
Hi folks, this is probably a simple thing I'm missing but I don't want to force and break anything.
i have a 7 port manifold from Underfloor Heating Manifolds c/w Iso Valves, Flow Meters, Gauges, Fill & Drain Points | VPS Underfloor Heating -...
Hello everyone,
Could do with some advice please
This is my current setup:
Vaillant ecotec plus 637 system boiler
Unistor unvented cylinder
Vr66 wiring centre
Vrc 470f
S plan system
Now I have just had underfloor heating installed and a HeatMiser UH8 wiring centre, a new motorised valve...
@Brambles
Hi mate. I'd like some advice from you please.
Have a fellow engineer who is thinking of putting a LLH on a system due to primary boiler pump not man enough for CH index circuit.
I dont know which boiler (he hasn't got back to me) but its a 30KW combi.
Currently there is an UFH...
Hi all
I have underfloor heating downstairs and radiators, plus two towel radiators upstairs. I have a Heatmiser UH8 and the radiators are connected to the the 5th zone and the towel radiators are connected to the 8th . Now, if I remember rightly from manuals, if you want to hook up a towel...
I have a job I will be asking a plumber to do but would like to understand what is involved so I can see if the end result will meet my expectations.
I have fully operational Underfloor heating system which I love but am looking to integrate into my smart home system.
Currently it is...
hi I’m thinking of changing my thermostat ( Heatmisertouch screen programmable) to a Nest. I currently have an old WB 28cdi RSI and will be replacing it with a Vokera 38kw Combi. Am I right to assume that all the wiring from the new or old boiler goes starlight to the heat link thing ( including...
hi. Looking for a Heatmiser Neoair thermostat 4 of them and UH8-RF fitted to exsiting heating system. Current wiring centre is a JGWWC and thermostats are managed by a salus RT500RF. Need finished system to be controlled by iOS devices. Current boiler is glow worm Ultracom. Please message me...
Hi,
I've got wet UF heating in part of my downstairs. It is split into 3 zones. The Heatmiser thermostats are wired to a Heatmiser wiring center. They are 3 wire stats - live, neutral and a volt free switched line. The boiler, pump and zone valves are managed from separate relays on the...
tiktok90
Thread
checked
heating
heatmiser
problem
stats
thermostat
thermostats
wiring
Hi, thanks for looking. Keen to get some advice please
Boiler: Valiant 637 connected to a 300l Megaflow.
13 Zones in total (6 Radiator + 7 HW Under floor heating)
Each to be individually controlled via a Heatmiser solution (Wired solution).
Keen to understand how each of the individual...
Pali
Thread
control
heating
heatmiser
manifold
mixing
please
radiator
radiators
undefloor
wiring
(Sorry, reposting...)
Hi chaps,
I was looking at getting Hive Multizone for our central heating and underfloor heating. The underfloor heating will be mostly heatmiser controlled with everything wired into a Heatmiser UH4 wiring center.
I wanted to know if Hive was compatible with this...
Hi chaps,
I was looking at getting Hive Multizone for our central heating and underfloor heating. The underfloor heating will be mostly heatmiser controlled with everything wired into a Heatmiser UH4 wiring center.
I wanted to know if Hive was compatible with this wiring center?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.