Search the forum,

US Embassy

Post new thread

Discuss US Embassy in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

helpsy

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,754
If anyone is interested I saw an advert for a Plumbing position at the US Embassy in London, think it was on LinkedIn.
 
been up there before a few months back. Nice working environment, basically no one target for isil and other bad lads in the uk
 
I'm sure there was a similar thread on this a year ago I'm sure they must have filled the vacancy by now! Poor chap probably recommended an icos and is now rotting away in Guantanamo bay
 
Status
Not open for further replies.

Reply to US Embassy in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Lou
Show us your fanciest radiators you have installed!!
Show us your fanciest radiators you've installed! We would love to see them! I love this Milano vertical radiator in the kitchen space. What do you think?
Replies
4
Views
206
Timmy D
T
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
191
dreikher
dreikher
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
141
Lou
Lou
Uheat - Jacob
    • Like
  • Sticky
Uheat's NEW Cordless Press Tools
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
902
Lou
Lou
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
263
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
DIY Advice
Tiling Forums UK
Tile Talk
Tiling Tools for Beginners
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock