Discuss Unvented Cylinder Kingspan Albion Ultrasteel in the Plumbing Jobs | The Job-board area at PlumbersForums.net

It is a problem with some part of your unvented hot water system, so definitely considered as your domestic hot water.
It is possible to have the cold supply side to the hot water unit faulty, but that still means it is a component of the hot water system faulty
 
If you are covered for hot water and heating call your provider and tell them to send a G3 qualified engineer. If the system has been correctly installed then water discharging through the tundish indicates a fault/failure of one or more safety components. A G3 qualified engineer should have no difficulty identifying and rectifying the problem
 
Hi I’m a senior engineer for the company you mentioned.

Just make the call or on the internet and list it as unvented.
We have many competent g3 engineers and I’m one of them.

Please note some of the service plans through insurance companies do not cover this type of system and then the job becomes chargeable.

If you have homecare cover direct with bg and you are covered you will have no issues getting this resolved.

Hope this helps
 

Reply to Unvented Cylinder Kingspan Albion Ultrasteel in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can central heating / gas engineer expert help me with below issue. During winter time only, I have been having issue with low pressure or...
Replies
0
Views
605
Afternoon. I have an issue with no water flow from any of the hot taps in the house, I can't seem to find a solution to the issue. System is a...
Replies
11
Views
354
Good evening, I'd like your opinion on something that is worrying me please: my landlady's plumber replaced the bottom/night element of my...
Replies
2
Views
485
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and...
Replies
2
Views
501
losing pressure
L
My heating system comprises an Ideal Logic 12 boiler located downstairs and a Gledhill OV SOL cylinder located upstairs . The problem is that when...
Replies
1
Views
500

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock