Search the forum,

Discuss Today's install. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Welcome Virgil......more pipe protection than anything, it's a working laundry room and small at that, lots of laundry baskets in an out

Thanks for the welcome. And fair enough when you put it like that :)
 
The mansion install, progress pics, still loads to do, take note of the auto air vent on the coil return vern ;) also split the 35mm into 2x 28mm magnacleans as some of you suggested. ImageUploadedByTapatalk1370889657.587269.jpgImageUploadedByTapatalk1370889673.420359.jpg
 
Dont want to sound stupid but what is that big black tank in the 1st picture?
 
Tony some of your work should be shown to these fast track fools to show how proper work should lookm
 
Still loads to be done, so much thinking involved, ill get some pics of the bathrooms too when they're finished, they're really special, £3500 shower head in the main bathroom.
 
Still loads to be done, so much thinking involved, ill get some pics of the bathrooms too when they're finished, they're really special, £3500 shower head in the main bathroom.[/QUOTE

They the waterfall colour changing ones ?
 
Still loads to be done, so much thinking involved, ill get some pics of the bathrooms too when they're finished, they're really special, £3500 shower head in the main bathroom.

£3500 shower head...What I could do with £3500??? A £10 tip and I'm buzzing

Thinking about it I need a new shower hose for my shower. £15 jobbie will suffice
 
Still loads to be done, so much thinking involved, ill get some pics of the bathrooms too when they're finished, they're really special, £3500 shower head in the main bathroom.[/QUOTE

They the waterfall colour changing ones ?

Yea the crosswater one, revive I think it's called. They make some nice stuff actually.
 
most of the unvented systems ive fitted has been done with 15mm to bath, 15 or 10mm to basins. 28-22mm distribution pipework as needed. the only time ive gone 22mm to bath was on a double bath.

other fixtures positions dependant of course.

so what your saying is is that you branch off to most appliances in 15mm from a 22mm or 28mm distribution pipe?
 
Continental.
 
Just work out the flow rates to each outlet and that will dictate the pipe size.
 
Don't mind me while I bump some threads in the plumbing forum category. This thread might not be a current topic, if it isn't, just let it drop off the list.

If you DO want to reply to it, go ahead, that's fine. Your post might add some value to the thread and help newer members in the future.
 
what a terrible load of installs.
 
thought I'd have a quick browse and laugh over some old stuff. been a couple years i think. still busy on here?
 
Status
Not open for further replies.

Reply to Today's install. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
285
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
196
Show us your fanciest radiators you've installed! We would love to see them! I love this Milano vertical radiator in the kitchen space. What do you think?
Replies
4
Views
160
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
251
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
437
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock