Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Thermostatic mixer bath taps in the DIY Plumbing Forum area at PlumbersForums.net

Messages
5
Just replaced taps on bath so kids can get a shower in bath as well ,worked fine to started with then water wasn't hot so took them back and exchanged them ,now these are doing same any ideas anybody ?
 
What type of system do you have ? Eg combi cylinder etc
 
Is cold from a tank or mains
 
Do you have tanks in the loft ?
 
was your exsisting bath taps 2 seporate taps (a hot tap and cold tap out of 2 spouts?)

Is your new tap a bridge tap ie a single spout out the middle?

if you turn the hot tap on only are you not getting any water all all or just cold water?
 

Reply to Thermostatic mixer bath taps in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
482
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Replies
12
Views
429
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down...
Replies
2
Views
165
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
168
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock