Discuss Smart meter. Or, not so smart meter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stani

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,505
Has anyone had a problem where the meter has shut down and then no gas released. My parents rang yesterday heating not working or gas fire, they are under contract, so engineer came out, thought is was governor, (sensible) asked for National Grid who came out but were unable to change meter, because it's a smart meter and needs provider to replace. They rang me to explain and the valve inside meter had shut down. He did manage to get it going, but couldn't guarantee it would last.
 
My parents have been told to switch off their smart meter as there is a fault with a batch of them and a replacement is being organised. Not sure how or which part they have had to switch off.
 
I've had one in an area of abysmal mobile phone network coverage I may be mistaken but I have a feeling it's struggling to get a signal and update, this is on a prepay job.
 
It is sometimes possible to kick start them again. There is a big issue with smart meters at the moment in that generally speaking, the network operation will not get involved with them. This leads to further delays as customer then has to contact supplier,,etc etc. Also Network operators generally run later,more anti social hours whereas meter operators dont.
 
Status
Not open for further replies.

Reply to Smart meter. Or, not so smart meter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I live in Azerbaijan and am looking to revamp the water system in my house. The first thing is that I don't have a water meter - probably a good...
Replies
1
Views
400
Had conventional boiler and tanks removed last year and new combi fitted and just recently had it serviced but the guy who did it has given me a...
Replies
9
Views
828
I had to gas rate on an E6 meter in a dark, muddy basement the other day. No place to put down tools. I stayed there for two minutes only to find...
Replies
2
Views
695
Deleted member 120897
D
B
    • Like
Hi, Have had a fault on our Ideal Icos HE15 boiler for a couple of weeks, keeps failing to light and shows LF (or FL) error. Boiler engineer...
Replies
3
Views
992
Hiya - we noticed our boiler was on 0 bar so the gentleman who came to fit a smart meter said to repressurise it and not to leave it. I googled...
Replies
6
Views
845
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock