Discuss Shower mixer model / supplier in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
3
Hi, I am trying to identify this thermostatic mixer valve to source a service kit. The water on off control seems to be getting stiffer, it's difficult for someone with limited hand grip. Photos of the valve attached. I can provide a photo of the control knobs fitted if that helps.
Thanks
 

Attachments

  • 20220803_130759.jpg
    20220803_130759.jpg
    337.9 KB · Views: 15
This is the mixer fully assembled. When I removed the outer temperature control knob there was a circlip loose which also seemed to be deformed or an odd shape. Since it's a power shower it's either on or off so any difficulty turning it off is pretty wasteful of water and energy.
 

Attachments

  • Screenshot_20220805-104710_Gallery.jpg
    Screenshot_20220805-104710_Gallery.jpg
    204.4 KB · Views: 14

Reply to Shower mixer model / supplier in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
229
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
283
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock