Search the forum,

Discuss Shower mixer model / supplier in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
3
Hi, I am trying to identify this thermostatic mixer valve to source a service kit. The water on off control seems to be getting stiffer, it's difficult for someone with limited hand grip. Photos of the valve attached. I can provide a photo of the control knobs fitted if that helps.
Thanks
 

Attachments

  • 20220803_130759.jpg
    20220803_130759.jpg
    337.9 KB · Views: 13
This is the mixer fully assembled. When I removed the outer temperature control knob there was a circlip loose which also seemed to be deformed or an odd shape. Since it's a power shower it's either on or off so any difficulty turning it off is pretty wasteful of water and energy.
 

Attachments

  • Screenshot_20220805-104710_Gallery.jpg
    Screenshot_20220805-104710_Gallery.jpg
    204.4 KB · Views: 12

Reply to Shower mixer model / supplier in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
135
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock