Currently reading:
Risk assessment - need help

Discuss Risk assessment - need help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

O

Old Account

hi guys,

I have been asked to supply a risk assessment for the upcoming plumbing job. I have never done that before and to be fair never needed. Does anyone of you guys know what has to be written there? I do not know what to write.

I only know I won’t be doing any hot works as I am using crimping technique.

Perhaps so body could tell me what to write or perhaps has had similar situations like me.

Kind regards,

Ron
 
:) haha will be all good!!! I just don’t like council properties. It always makes my head! I always get those weird questions: like can you paint the flue pipe in black or great once it’s installed.
How do you put a price to these jobs?
If for example you havent agreed where the boiler is going and where you will run pipes etc?
 
How do you put a price to these jobs?
If for example you havent agreed where the boiler is going and where you will run pipes etc?

If I get it right it’s to put a vert flue ontop of a 3 -4 story building so it’s incase he falls off
 
The whole point of a risk assessment as most will know is to assess the hazard associated with the works and control, reduce or remove the risk. A paperwork exercise is all well and good until something goes wrong, In a domestic environment there are plenty of hazards.
 

Reply to Risk assessment - need help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock