Search the forum,

Discuss Nicely done 4k times Mr Watkins in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

rpm

Esteemed
Plumber
Subscribed
Messages
12,703
Nicely done Chris, always polite and informative and worth reading.
 
Well done old chap
 
Well done Chris, - very informative posting! :clap:
 
:yes:Well in Mr.Watkins as the lads have said very informative posting congrats on the 4000 +posts regards Turnpin
 
Any mods around to adjust the typo error in the heading please.

:annoyed:

done mate steve b
 
Last edited by a moderator:
Thanks for all the kind words, one tries, or is it, ones is very trying.
Never know which.
 
Last edited:
Knowledgeable and up to date information.Always beneficial to read. Keep posting Chris. Congratulations.
 
Status
Not open for further replies.

Reply to Nicely done 4k times Mr Watkins in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
310
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
471
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
225
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
855
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
228
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock