R
REDSAW
just priced up a job to replace a w.c l/l system and some other work.
the outlet is lead at ground level (on floor boards runs 10'' on floor).exiting with 90 elbow 2' into stack.
i forgot to measure the width of the pipe in w.c and think its 3 1/2''.
does this sound right, as i need to get the stuff before i go to fit as the location is miles from merchant and being tight i dont want to buy more than one fitting in stock.
secondly, i am thinking of using a jollyflex by pulling the lead pipe up slightly from the floor for collar clearance to save costs on renewing the soil pipe to stack.
anyone have opinion, details and a link for the jollies. and do they do 3/ or 3 1/2''
thanx.
the outlet is lead at ground level (on floor boards runs 10'' on floor).exiting with 90 elbow 2' into stack.
i forgot to measure the width of the pipe in w.c and think its 3 1/2''.
does this sound right, as i need to get the stuff before i go to fit as the location is miles from merchant and being tight i dont want to buy more than one fitting in stock.
secondly, i am thinking of using a jollyflex by pulling the lead pipe up slightly from the floor for collar clearance to save costs on renewing the soil pipe to stack.
anyone have opinion, details and a link for the jollies. and do they do 3/ or 3 1/2''
thanx.
Last edited by a moderator: