How to attach wall hung cloakroom sink

[icemancomeths]

Hi Guys,

I have the following sink VITRA 6141L003 and it didnt come with any fittings.

How do I connect this to the wall? The previous sink had bolts which I could simply tighten up, with this sink there is no facility for a bolt to go through.

At the back there are 2 small holes but thats it.

Would love any help. The second photo shows that there is no access to the hole to tighten the bolt.

 

[lame plumber]

sink bracket set found in all good merchants

 

[Alpha man]

^^^^, or lots of mastic and 6" nails!

 

[tamz]

Offset brackets

 

[Chalked]

Here you go.
Heavy Duty Basin Brackets Per pair 028KAHD

 

[icemancomeths]

Here you go.
Heavy Duty Basin Brackets Per pair 028KAHD

So chalked are the holes a waste of time, does it simply sit on those brackets? But where does it slot in on the sink?

 

[kirkgas]

So chalked are the holes a waste of time, does it simply sit on those brackets? But where does it slot in on the sink?

Line it up properly and the sink simply slots down onto the brackets, silicone it to the wall on the top edge and it will never move

 

[icemancomeths]

Line it up properly and the sink simply slots down onto the brackets, silicone it to the wall on the top edge and it will never move

Will these also do the trick? Theres a toolstation down the road.

 

[Ray Stafford]

I have the following sink

sink bracket set found in all good merchants

But where does it slot in on the sink?

Line it up properly and the sink simply slots down onto the brackets,

it is not a sink.

It is a basin.

<twitches>

 

[SimonG]

kitchen sink, wash basin, c'mon lads

 

[erpkid]

So chalked are the holes a waste of time, does it simply sit on those brackets? But where does it slot in on the sink?

The holes are where the slurry for the basin formation entered or exited during manufacture