Search the forum,

tighten

Tighten Up Vol. 88 is the third studio album by English band Big Audio Dynamite, released in 1988. The album peaked at No. 33 on the UK Albums Chart and at No. 102 on the Billboard 200 but was their first not to receive a certification.
The album derives its name from the Tighten Up compilation album series by Trojan Records. The album's cover artwork was designed by Paul Simonon, the former bassist for the Clash, of whom Mick Jones was a member. Big Audio Dynamite's keyboardist Dan Donovan took the back cover photo with Josh Cheuse.

View More On Wikipedia.org
Recent contents Top users
  1. T

    How to tighten 15mm Flexible Tap Hose Adaptor

    This is going to sound stupid - but it is giving me problems. I have fitted new flexible tap hoses that each connects with a tap hose adaptor to give the recommended flat surface to connect to an isolator. All good except I cannot tighten the flexible hose hex nut without twisting the hose...
  2. S

    My in wall toilet seat screw won’t tighten

    I tried to install a new toilet seat and I’m stuck in a process where I couldn’t loosen or tighten the screw. I also tried rotating the screw in both ways but that’s just a endless process and it wouldn’t come off. It’s a in wall built toilet so I could only stick my hand underneath a bit and...
  3. FloowToilet

    How do I tighten this toilet seat?

    Just moved into a new place and the toilet seat is super loose. Spent about 2 hours trying to figure out how to tighten this toilet seat. I did try unscrewing it from the bottom, took it out and inspected it but couldn't see any obvious way to tighten. Tried screwing the bottom screws in tigher...
  4. saycea

    How to tighten this toilet seat?

    Hello - I have a loose toilet seat but no obvious ways to tighten it. I have looked all over the Internet and I have tried various things that have been recommended. I have looked for buttons to release it, I've tried lifting the metal caps to try rotate them, I've tried removing the little...
  5. K

    How to tighten washing machine waste pipe

    Hello, Need some advice with new washing machine waste pipe. We have replaced our Indesit washing machine with a new Hisense model. The Hisense waste pipe is connected under the sink. It is slightly different from the Indesit, which means no matter how much we tighten it, it keeps loosening...
    • kbqwert
    • Thread
    • machine pipe tighten washing washing machine waste waste pipe
    • Replies: 6
    • Forum: Ireland
  6. B

    loose toilet seat, screws wont tighten

    Hello I cannot get my toilet seat to tighten. I have no access to underneath the toilet. I have taken the toilet seat off and tightened the screw, but it just keep spinning. As if the hole diameter is too big. I've tried the rubber expanding fittings and the plastic ones of similar style. Is...
    • BigBob909
    • Thread
    • america loose screws tighten toilet toilet seat usa
    • Replies: 4
    • Forum: USA
  7. T

    Loose toilet seat cannot get it to tighten

    Just bought a property and having problems with a loose toilet seat. There are Allen screws keeping the seat in place but if I try to tighten them it’s still loose. Is it a toilet that needs removing to gain access to the underside in order to tighten the seat?
  8. M

    Toilet seat screws won’t tighten

    Our toilet seat screws are hidden in the pan and are self tightening, however they just spin around in position and won’t tighten. Any advice please
  9. D

    Anyone drive away from a job and then worry about if you’ve forgot to tighten any nuts

    Just me or anyone else drive away from a job and worry if you tightened all the nuts?
  10. P

    Novice question - how do i tighten this fitting?

    After the recent cold spell I had a link in an out house. The fitting is still leaking (see attached). I'm not familiar with the connection type. I've tightened the top nut but it is still leaking, apparently from the black and white assembly part. Do I need a new connection or am I supposed to...
  11. B

    Toilet seat tighten, tried everything

    toilet seat I have needs tightened. No access to underneath, no mechanism to remove seat. Been searching for solution for weeks. See photo. Any advice please? No brand name. Thanks, BobD.
  12. D

    nightmare tap that just wont tighten up

    Hi lads i have a few bathroom monoblock basin taps in my house that seem to be loose i tightened the nuts with box spanners and it still moves and it leaks any water that splashes around the bottom of the tap. the brass nut is as tight as it will get without breaking the sink. all three taps...
  13. A

    How to tighten a toilet seat on a inaccessible Heritage unit?

    Hi there I hope someone can help with some advice. I have looked at a few threads but am still a bit mystified when looking at my own toilet. I had a new unit installed 1.5 years ago and with 2 kids, 1 side of the seat has now become loose. In every other toilet I have owned this is a simple...
  14. D

    small leak cwst valve tail

    I wonder if someone can give a little pointer. I've drawn a bit of a ropey diagram so I can explain my problem. Having to fit a new 3/4 inch float valve to the cold water storage tank, and the original was in one piece, so removal had to be unscrewing the whole thing including the threaded tail...
  15. D

    Tap or spout problem

    Hi, my kitchen spout leaks if i dont really tighten the hot water tap. anyone advise me on, is it a tap washer problem or spout washer problem.? Thanks
  16. O

    Kitchen sink pipes keep coming apart

    Hi all Our kitchen sink / dishwasher outlet pipes keep coming apart, every few months. Sometimes it's when we empty the washing up bowl down the sink, sometimes there's no obvious reason. Here's what it looks like: The top arrowed join definitely comes apart, and maybe the lower one too...
    • OckErt
    • Thread
    • apart attach coming kitchen kitchen sink pipes sink tighten washer waste
    • Replies: 9
    • Forum: Plumbing Jobs | The Job-board
  17. S

    New house, unusual tap fitting

    Hi guys, I've just moved into a new house and noticed the mixer tap in the kitchen is quite loose. I stuck my head under the sink and noticed it wasn't just a normal nut on it that could be tightened easily. I've attached a couple of pics of what I found. Any suggestions on how to tighten it...
  18. Super Mario

    What spanners/grips you use for chrome rad valves

    My bahcos slippin and grips chewing the body what you use?
  19. W

    If I cannot tighten a compression joint quite enough..

    On 3/4 pipe, with a new 3/4 olive (brass, not copper alas) under a bath, on the further away of the two feeds, with bugger all space between wall, pipes and bath, using grips, tap spanner, adjustables, jaw dropper, no matter how many blood vessels I burst, are you guys all going to hand on heart...
  20. S

    Weeping compression fittings

    How is it that when something is worked on in the area that compression fittings are fitted, the compression start to weep even though they haven't been touched and when you try to nip them up they are solid?
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock