Currently reading:
Hep2o - mice rodent rat damage

Discuss Hep2o - mice rodent rat damage in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

Johnnie Godman

Hi,
We developed our m house 4 years ago and used literally 100s of meters of Hep piping.
We had our first leak (between ceiling and first floor causing plasterboard of ceiling and wall to come down, etc) 2 weeks ago.
Cause of leak, a mice chewing through the central heating pipe during the summer months.
Beware of using plastic piping.
Johnnie
 
There are loads of plastic plumbers around with no insurance or not traceable.
Sorry for you and your ceiling post where you are there are plenty of genuine decent plumbers on here
 
Unfortunately there are a lot of places that you are not allowd to solder because your insurance wont cover it so plastic is the only alternative. That said using copper is a dying art but if you are known to have a rodent problem then any plumber worth his salt would not use plastic.
 
i dont use plasitic anyway unless its in a place were its impossible to get copper never heard of not being allowed to solder as long as your carefull and have water and damp cloth about and a heat mat
 
Trap the rats/ mice as poisoning makes them thirsty and will chew through more pipes
 
in propertys where you are not allowed to solder you are better off using pressfit type fittings or brass/copper pushfit then using plastic, as most listed building tend to have a rodent problem of some sort.
 
I doubt it was a mouse probably movement causing chafing on a screw or nail, Never had a problem with plastic, Plastics fantastic!
 
seen loads of pipes chewed
they can either smell or hear the water, either way they know its in there.
 
It's the vibration in the pipe that attracts them, same with cables. Always copper if there's a rodent issue.
 
I think its to do with their whiskers and sensing changes and stuff.




On one job we had some 'thieving gypsy mice' who ripped out all the copper and left the plastic ...
 
Last edited by a moderator:
i dont use plasitic anyway unless its in a place were its impossible to get copper never heard of not being allowed to solder as long as your carefull and have water and damp cloth about and a heat mat
Read your insurance policy especially the small print.
 
Hep say " not suitable for anywhere there are rodents ", or similar wording. I say, where do you not get mice? Even the best sealed up homes, with careful owners, can end up with a mouse. I wouldn't use plastic pipe if at all possible. Mice will chew many things, especially plastic. I am told their teeth keep growing, so they have to keep using them. Any plumber who thinks plastic pipes are safe, are deluded.
 
Practically EVERY house in the UK, from humble dwellings to multi million pound mansions have mice in them at one time or another and you never know they are there. Particularly bad in the Winter as they come indoors to the warmth and will eat bloody well anything.

Wonder if nine out ten mice that have expressed a preference like Speedfit over Hep?
 
system3;224643 Wonder if nine out ten mice that have expressed a preference like Speedfit over Hep?[/QUOTE said:
Depends if they are served with cheese or not! Mice love Mars bars, so put a bit Mars bar on traps to get them.
 
Seem to remember reading somewhere that mice don't like eating Speedfit for some reason. Different flavour I suppose.
 
An old farmers trick is to spray cats pee where the wee buggers are living. Don't think I'll try it for myself first. Wonder how he got the cat to pee on demand for him?
 
You talking about me pal! mouse.jpg
 
Someone once told me that sugar is used in plastic pipe production and this is what attracts the mice. Don't know if there's any truth in it though.
 
They eat holes straight through the middle of the little black hard plastic covers on the ends of capacitors on some oil burners. As they can do that, then plastic pipes are soft food for them. Anyone with plastic pipes in their house should worry when they hear a mouse. It might make public appreciate copper plumbers.
 
i'd be suprised if anyone has ever been successfully sued over an installation of a pipe that a mouse chewed through, known problem or not.
 
not that threat of being sued is the only thing to worry about of course. care and duty to customers is primary, just a thought.
 
i'd be suprised if anyone has ever been successfully sued over an installation of a pipe that a mouse chewed through, known problem or not.
For other reasons, polybutelene pipe is banned in the US. All the coils I've bought have stickers saying "Not for sale in the USA".
 
A few years ago, at a trade exhibition, 2 Speedfit guys, ( who looked like real plumbers ), were demonstrating Speedfit. When my brother said to one of them, that he heard mice & rats eat it, the guy grinned, nodded & then said " sure, if you tell a woman a rat ate it, she will be more worried about the rat in her home, than a flood!". Well at least he was honest!
 
An old farmers trick is to spray cats pee where the wee buggers are living. Don't think I'll try it for myself first. Wonder how he got the cat to pee on demand for him?


i've just realised i must have worked in a right few farmers houses over the yrs, that explains the smell
 
Status
Not open for further replies.

Reply to Hep2o - mice rodent rat damage in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock