Search the forum,

Grant Vortex Oil Boiler

Post new thread

Discuss Grant Vortex Oil Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

A FLINT

Hi I have a grant vortex oil boiler and I have turned it off for 4 days. When I turned it back on I can't get any hot water or heating. I have filled water pressure back up but light at bottom of boiler isn't on could this be the problem if so how do I sort it?
 
Well there's your problem, its a Grant :)

Seriously though, find a competent engineer to take a look.
 
If youve had to fill it up with water the chances are its overheated. Undo the plastic nipple on the front panel marked overheat or limit stat and press the button underneath, if it clicks it has been triggered and the boiler will go
 
Status
Not open for further replies.

Reply to Grant Vortex Oil Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
159
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
263
oz-plumber
O
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
293
Matt0029
M
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Chuck
C
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
222
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Electrical News
TilersForums.co.uk | UK Tiling Forum - Est 2006
DIY Talk
Contractor Advice Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock