Duel gas boiler installation

[Simon 45]

Hi Has anybody designed or installed a duel gas heating boiler installation for Schools, Hospitals, factories, office blocks or old peoples homes or domestic use.

We are now living longer, hyperthermia is a big killer when temperatures drop well below freezing, should we be prepared for the instance when our gas boiler fails and we are unable to find a heating engineer to carry out repairs at short notice.

Hence the question should we install a standby boiler, that may save our lives one day. What do you think?. switching between boilers could be made simple by operating an electric switch.

 

[bacon_sandwich]

Many of the above already have multiple boilers, where there is a single boiler, temp space heating or convention heating is very simple to set up. I carry 6KW of electric heating which i hand out if the boiler is going to be off. Offices often have a/c for summer, these can often be used in heat mode. From my experience not really an issue that cannot be resolved quickly.

 

[ShaunCorbs]

Depends on your heating load if under 30kw no point in going down the dual boiler route

Your better of just buying a few oil filled rads

 

[Last Plumber]

Hi Has anybody designed or installed a duel gas heating boiler installation for Schools, Hospitals, factories, office blocks or old peoples homes or domestic use.

We are now living longer, hyperthermia is a big killer when temperatures drop well below freezing, should we be prepared for the instance when our gas boiler fails and we are unable to find a heating engineer to carry out repairs at short notice.

Hence the question should we install a standby boiler, that may save our lives one day. What do you think?. switching between boilers could be made simple by operating an electric switch.

As Bacon said, we already do that. Have done for decades.

 

[king of pipes]

As above plug in electric fan heaters is all you need really . kop

 

[Chalked]

On with one right now.

 

[Gasmk1]

View attachment 31499 On with one right now.

very nice work we have been using the pressfit for about a year now looks so neat compared to soldered and a lot quicker

 

[Last Plumber]

Very Neat.

 

[Harvest Fields]

Really nice mate

 

[Last Plumber]

View attachment 31499 On with one right now.

Who stole Gas Meter?

 

[gmartine]

I sure like those purty plated butterfly/ball valves on those grundfos circulators, who sells'em?

 

[ShaunCorbs]

I sure like those purty plated butterfly/ball valves on those grundfos circulators, who sells'em?

Williams trade only sells them

 

[Chalked]

I sure like those purty plated butterfly/ball valves on those grundfos circulators, who sells'em?

They are called perfect pump valves

 

[gmartine]

Tnks, found'em on fleabay and Toolstation

 

[ShaunCorbs]

They are called perfect pump valves

You didn't pay 20 a pair did you ?