Discuss Bramham Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

Veggie Dave

I need to find a rubber valve washer for some Bramham taps but I've never seen anything like the washers that are in there ... nor have my local PTS, City Plumbing and the few bathroom places I tried.

Can anyone tell me who makes them, please?

bramham.jpg

The actual tap is like these Bramham taps but in a monobloc design.
 
Just standard soft tap washers taps sold by PC and made by peelerpeeler
 
Hi Veggie Dave did you have any luck sourcing these washers - my dad is having the same problem with very similar looking taps and has had no luck with Plumb Center...
 
Status
Not open for further replies.

Reply to Bramham Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi I'm going to be fitting a tap like this one: And just wanted to check that this is the correct part for connecting to 15mm copper pipe...
Replies
8
Views
510
Hello, I’ve used the hep20 tap connectors a few years back when I did. C&G plumbing course. I brought a few the other day and in the packet was a...
Replies
3
Views
533
Forgive my ignorance, with this basic question, but I seem to be struggling to both understand, search for, and source, the appropriate washer...
Replies
7
Views
387
Can anyone help me with an ongoing issue I've had since I had an annual service on my combi boiler, which is a Potterton Performa 24. Literally...
Replies
3
Views
355
We have just moved in to a 1934 Semi- and I am getting round a few simple DIY tasks, including a couple of plumbing-part renewals such as modern...
Replies
8
Views
638
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock