Search the forum,

Bramham Taps

Discuss Bramham Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

Veggie Dave

I need to find a rubber valve washer for some Bramham taps but I've never seen anything like the washers that are in there ... nor have my local PTS, City Plumbing and the few bathroom places I tried.

Can anyone tell me who makes them, please?

bramham.jpg

The actual tap is like these Bramham taps but in a monobloc design.
 
Just standard soft tap washers taps sold by PC and made by peelerpeeler
 
Hi Veggie Dave did you have any luck sourcing these washers - my dad is having the same problem with very similar looking taps and has had no luck with Plumb Center...
 
Status
Not open for further replies.

Reply to Bramham Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Connector for tap with threaded tails. And should I seal the washer?
Hi I'm going to be fitting a tap like this one: And just wanted to check that this is the correct part for connecting to 15mm copper pipe using compression: https://www.NoLinkingToThis/p/flomasta-compression-straight-tap-connector-15mm-x-1-2-/58294 If not, please could someone let me know...
Replies
8
Views
442
Mike01
M
T
Hep20 tap connector washer
Hello, I’ve used the hep20 tap connectors a few years back when I did. C&G plumbing course. I brought a few the other day and in the packet was a loose washer (not the tap flat washer). Can anyone tell me what it is used. I’m using copper pipe btw. Regards Tezzer
Replies
3
Views
480
Tezzer2022
T
S
Anatomy of a normal half inch tap
Forgive my ignorance, with this basic question, but I seem to be struggling to both understand, search for, and source, the appropriate washer, o-ring or gland, for this type of tap. Maybe, no one ever replaces this type of washer/component? Background: I discovered a leak in the cupboard from...
Replies
7
Views
326
sutty600
S
E
Anyone know how to get into this tap?
Hi. Can anyone help me get into this tap? I have them on the bathroom sink and bath and 2 out of 4 are dripping. I've have had two plumbers in to replace the washers and neither could get them open. The gold coloured ring under the top unscrews on two of them but won't budge on the ones that...
Replies
1
Views
156
ShaunCorbs
ShaunCorbs
V
Removing Pillar Tap and faucet
Hi all, I'm completely inexperienced at this, but my kitchen taps are ancient, and the water has started dripping. Rather than just change the washer, I want to change the entire thing to a mixer tap that supports two holes. I think I've figured most of it out except for the part where I...
Replies
1
Views
414
Deleted member 120897
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock