Search the forum,

Boilermate 2000 no hot water at all...not even just from immersion

Post new thread

Discuss Boilermate 2000 no hot water at all...not even just from immersion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
If you are not Gas Safe registered you should not have cover off that boiler as it forms part of combustion seal.
Close it back up & call in an accredited GSR engineer.
Cheers,
Andy (Allgoode)
 
Put the covers back on and call a gas safe engy

As unless your gas safe you can't remove any covers / case seals
 
No no no ! you cant do that put the casing back and call a GSRI probably a simple solution but nothing you can do yourself . kop
 
Status
Not open for further replies.

Reply to Boilermate 2000 no hot water at all...not even just from immersion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
653
John.g
J
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
oz-plumber
O
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
225
cheddarman
C
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
193
ShaunCorbs
ShaunCorbs
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock