Discuss Best/worst tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Worst tool.....rotten burger pressure gauge that has the rubber end and jubilee clip, always leaked then when it reached 4 bar the gauge popped off the end and broke!!! Piece of carp!
Screwfix pencils!Best - estwing hammer . Worst - cheap pencil that the lead is always broken in
Screwfix pencils!
I have had two problems with rothenberger tools before, each time I have emailed rothenberger & they have sent replacement parts in the post free of charge! Excellent company to deal with! I also got a free goodie bag of flux, permanent pens, laco heat repair epoxy sticks & barrier heat spray!!
Nerrad sent me two new bloody wheels for my pipe slices & both still spiralled!!! Grr
I have had two problems with rothenberger tools before, each time I have emailed rothenberger & they have sent replacement parts in the post free of charge! Excellent company to deal with! I also got a free goodie bag of flux, permanent pens, laco heat repair epoxy sticks & barrier heat spray!!
Nerrad sent me two new bloody wheels for my pipe slices & both still spiralled!!! Grr
Same here Steve. Its hard to get a decent pencil these days which just reminded me to lay a couple out for the morningi buy staedler hb pencils in boxes of 50 from ebay about 12 quid leads dont fall out
Put pressure on the tip and it comes out the back.Ha ha, we were just talking yesterday about how rubbish they are. Just as you get a decent point on it the lead drops out!
Put pressure on the tip and it comes out the back.
i buy staedler hb pencils in boxes of 50 from ebay about 12 quid leads dont fall out
Yellow and black are the paler h type and red and black are the darker b type iircThey the black and yellow ones? Normally buy from supermarket
i detest pointless tools (i dont own any) ... olive removers etc.
Got to disagree on that - now. Never had any until a few months ago when I had a few jobs replacing rad valves in houses. SO much quicker!
Complete rhubarb.Got to disagree on that - now. Never had any until a few months ago when I had a few jobs replacing rad valves in houses. SO much quicker!
Reply to Best/worst tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.