Discuss Bath overflow and drainage misaligned in the DIY Plumbing Forum area at PlumbersForums.net

Messages
28
Hi all

I purchased a freestanding bath and when I came to cut the holes for the taps I realised the hole for the overflow is misaligned with the drainage (see photo). There's some room within the overflow hole that allows me to straighten the chrome fitting in line with the drainage, but not quite perfect (see 2nd photo). I also noticed no matter where i set the chrome fitting into the overflow it doesn't quite sit well enough or tight enough to completely seal the hole with just the washers provided. I assume a bit jointing compound or similar sealant would solve this?

bbb1.jpg


IMG_20221023_141630.jpg


The distributor have offered me a replacement bath or a refund and have no interest in collecting the faulty bath. I can't decide what option to take - I shouldn't think I'd get much if i sold this faulty bath and part of me has little confidence that the overflow / drainage on the new bath will be perfectly aligned anyway. It wasn't cheap but its probably Chinese manufactured.

Other than the fact the taps will have to be mounted a little out of line with the overflow (or drainage) and sealant will be required to seal the fittings is there any reason not to plumb this bath and get a refund?

Cheers. P
 
By the time there’s water in the bath and an optical allusion due to the water you won’t notice it just mastic the overflow in where you want it etc
 
Just put your laser away and plumb the bath in, waste of world resources to scrap it.
Yeah, you're probably right. Anyone who took this bath off me would have to buy the feet and drainage fixtures which would amount to about £150, no one's going to do that and give me something for the bath no matter how small, so the bath probably would go to scrap.
 
By the time there’s water in the bath and an optical allusion due to the water you won’t notice it just mastic the overflow in where you want it etc
Yeah, I have no doubt I'd soon forget about it, especially as it would essentially be a free bath. I think the distributor has been quite generous really.
 

Reply to Bath overflow and drainage misaligned in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

hi all, I'm just sorting the drainage for my freestanding bath. Due to a slight misalignment of the drainage / manufacturing error I'm unable to...
Replies
5
Views
625
Can anyone suggest a compatible overflow waste that works with this Bath? Appleby Roll Top (freestanding) see link below. I don’t want to fit an...
Replies
0
Views
1K
All, Belfast, Northern Ireland. I am in a bit of a predicament. I have recently had a stove fitted in a chimney that had a disconnected and...
Replies
8
Views
1K
Very short version. Im a sole trader of only 10 months, but an experieced Plumber of 30 years. Installed a bathroom for a customer, they wanted me...
Replies
29
Views
2K
Hi, Can I pick your brains? My boiler is often reluctant to start, sometimes it does, sometimes it seems that it will if the demand is from the...
Replies
19
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock