Hi I have an ecofit Sustain 835 boiler and I recently removed a radiator to paint behind the skirting and now when I have replaced the radiator I have an error code f22
I know this is the water pressure however I can’t seem to see the valves under the boiler to increase the pressure again
I...
Evening all. I have been to change a pump on a vailliant ecotec plus 824 as water was not circulating and the boiler kept cutting out. Also when I opened the pump vent it sprayed straight into my face so couldn't check to see if it was turning.
Any way, changed the pump and it started ok but...
I have a system upgraded in september that has developed a pipework vibration problem its not all the time checked the zone valves seem ok system running at 65 degrees speed 2 on a new Dab evo pump auto bypass fitted , gets quite loud for a short time then quietens down its not a air problem...
Hi All,
My first post. This is partly my fault for now keeping tabs on this.
Around 3 years ago, I had two boilers installed on two rentals houses. Unbeknown to me the installer did not register either of them.
So I contact the installer, he claims he has an issue with the Vaillent portal...
Hopefully someone can offer best course of action!
have slow pressure loss of approx 0.5 bar over 1 week on the title boiler above.
Have british gas homecare and they have now visited 3 times without finding cause of problem.
first two visits they just re-charged expansion vessel and...
domo
Thread
boiler
central heating system
plus
pressure
pressure loss
slow
turbo
vailliant
Hi I am new to this and not sure how to put up a pic without it saying denied.I am unsure how to connect the nest heat link to this combi. Any advise would be great
Alright guys, just a quick one. Fitted a vailliant ecotec pro 28 today and upon commissioning the gas rate was slightly lower than 10% of the nominal, which baffled me because ive probably fitted 20 of these boilers and they have all been within range.
All of my other checks where fine so i was...
Alright guys, just a quick one. Fitted a vailliant ecotec pro 28 today and upon commissioning the gas rate was slightly lower than 10% of the nominal, which baffled me because ive probably fitted 20 of these boilers and they have all been within range.
All of my other checks where fine so i...
Intermittently locking out displaying fault codes f54 f28
Please advise think I read possibly faulty gas valve somewhere but cant find post again
Might go couple of weeks before locking out never witnessed myself and is a holiday let so needs sorting
Hello
I installed a new vailliant 937 with the cylinder on the back in the hope- as advertised on Vailliants website of getting 20 litres per minute out of it. When I fired it up I only got 14 litres a minute. I rung them up and they advised me to install a blending valve on the outlet, which...
Hi guys
I know this topic has been covered before but I just want to be 100% sure before I attempt wiring the stat to the boiler.
one of my customer has existing Honeywell CM927 wireless stat wired into his current boiler but I have quoted to install a new one which is going to be a new ecotec...
Vaillant EcoTec 637 losing pressure
Hi there, I really hope someone can help me.
We have a Vaillant EcoTec 637 and for several months we have been losing pressure. Initially, we were able to top up the water and the pressure wouldn't drop for a several days. Now, it's less than 24 hours. The...
Hello guys!
Excuse me about my English! In the following text when I say "open" I mean I turn the valves to let water flow and "close" to stop water flow.
After having red light on and not hot water or heating, I saw in some other posts that I should "open" some valves to refill with water...
Hi I just got a call from a client who needs a boiler installed. BG have offered her a 15kw baxi but she wants a vailliant. heat only they are. Would it be ok to put a 18kw vailliant in instead of the 15kw baxi?
Saw this flue today, looks to me like the first section is actually meant for a vertical flue and is being used on a horizontal flue... Anyone seen this before?
dave1
Thread
attach
flue
installation
plus
remember
systems
turbo
vaillant
vailliant
Can anyone suggest how I can clear/check waterway for blockage?
I have a MAG125 water heater that runs the pilot OK and when ho****er is demanded, it fires up for just about 1 minute. The gas then shuts down.
A local guy has said that the problem is almost certainly lack of water pressure...
tda171
Thread
caravan
heater
static
vailliant
water
water heater
Hi, having a prob with this chb, when prog on 24hr chb ok in hw/ch. when in time mode chb sometimes goes to lock out and the "egg timer" flashes have replace pressure switch at pump and cleaned tubes but to no avail. Have also checked pump it seems to be ok any advice would be greatful ps...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.