Search the forum,

mt10

The Mitsubishi 1MT was a Japanese single-seat triplane torpedo bomber built by Mitsubishi for the Imperial Japanese Navy Air Service. Designed by the former Sopwith designer Herbert Smith it was intended for use aboard the Japanese aircraft carrier Hōshō.The 1MT1N flew for the first time in August 1922 and it entered service as the Navy Type 10 Torpedo Bomber or Carrier Attacker. 20 aircraft were built, but the aircraft was difficult to fly and unable to operate from an aircraft carrier when carrying a torpedo. The type was soon withdrawn and scrapped.

View More On Wikipedia.org
  1. C

    Refilling key snapped in open position on Worcester MT10-safe to use?

    Hi all, I wonder if someone can help. We have a Worcester MT10 combi boiler that has a fault with the expansion vessel. The landlord is having the boiler replaced this weekend, but in the meantime I was advised by their plumber to top up the pressure each morning (as it's currently dropping...
  2. P

    Can anyone help with a worcester mt10 timer

    The clock function has stopped working. Heating and water are working fine but we can’t use the timer function as the clock has stopped turning. I’ve tried resetting, and switching between ‘on’, ‘off’ and timer at various stages. Does it have a separate battery or anything similar? Thanks
  3. A

    Using a Drayton programmer, is there any need for an MT10?

    Finishing off an install in the morning, replaced wiring center and programmer. Am I right in thinking there is no need for an MT10 mechanical clock? When I was picking up my bits someone said just stick an mt10 on, I picked one up just in case but don't see the point in it if I have the ch...
  4. C

    Mt10 on a 25si

    Just been out to a house, the tnt says she cant control the heating with the roomstat, went out and she leaves the mt10 switched to On and controls the heating with the roomstat. Checked that the heating works at all by sticking it in service mode etc, rads all worked fine, turned the mt10...
  5. B

    Worcester MT10 programmer always ON

    Hi, I have a Worcester 28i Junior with a MT10 programmer and separate Drayton remote thermostat. The problem is that the boiler programmer has no effect at all on the heating operation. The central heating works fine but is only controlled by changing the thermostat temp setting. The...
  6. S

    WorcesterBoiler MT10 control clock

    My boiler was set to come just before we arrived home from work. When we got in, no heat, the timer was stopped at 6 am this morning and had not appeared to be going round. It's a worcester cdi boiler with a manual clock mt10. Will this mean the clock is faulty. The heating goes on if i put...
  7. Y

    MT10 Mechanical Timer

    My boiler is a Worcester Bosch Junior model with the above timer fitted. It seems to have a mind of it's own at the moment timer wise and is one when it should be. It is more on than off even though the timer is set correctly. I have it at the right position within both the 12 and 24 hour...
  8. J

    Mt10 mechanical timer - Worcester bosch

    Hello, I have a mt10 mechanical timer on my boiler. How can I tell if the clock is am or pm. Is there a way or is it a design flaw? many thanks in advance. j.
  9. hammers4spanner

    worcester mt10 rf stats

    have a couple mechanical worcester rf room stats for sale , still boxed and with instructions , also have a timeclock for sale. anyone from plymouth area interested pm me thanks
  10. S

    worcester bosch junior 28i, Mt10 Mech Time Switch, and thermostat woes

    Worcester Bosch Junior 28i In October last year after the bitter winter, we decided on having central heating installed in our 2 bed roomed terraced house, the installation went well and they did great job. The boiler is situated in bathroom cupboard, where the old hot water tank used to be...
  11. H

    MT10 Timer not working

    I have a Worcester Bosch 30cdi Boiler with a MT10 Mechanical Timer fitted, the problem I have is that the Timer seems not to be working, the clock ticks round as normal, but the heating does not come on at the specified times, I have even advanced the clock to start and stop times but nothing...
  12. G

    Mt10 rf mechanical stat

    Am i doinfg this right ? when installing a mt10 rf stat and reciever on worcesters do i leave or remove the link ? I ask this as suddenly had a batch come back to me after installing these types of stats .
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock