Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.7K
- Locked
Dan submitted a new resource:
Bodge it 'n' Dodge it - We have a really fast van for doing one after we have said we are finished
Read more about this resource...
I have been trying to fit a Vellamo touch tap but can't get water flow through, I can hear the tap clicking but nothing happens.
I've just moved into a new build flat, and am looking at getting a water softener installed. I don't have enough space under my sink, but I'm not that fussed about having a drinking water tap, so I was looking at maybe putting it in the utility cupboard.
However, my understanding with water...
I wonder if anyone can help me. The oil level in the BM valve on the side of my Rayburn seems to have dropped as it now doesn't see to be high enough to enable the oil to reach the wicks in the burner unit. Oil flow appears fine but the flow stops before it reaches the main part of the burner...
Looking for a heating engineer to look at a gas central heating system with a warm air flow in the Uckfield area.
thanks
Daniella
Good morning all, Its been a while since I posted but another B of a problem has reared its head. I'm now 4 weeks into problem solving a lock out issue on the cooker burner only. The boiler side works fine. I have currently replaced all the service parts twice!! once by switching with...
En-suite shower room refurb needed in Twyford RG10, Berkshire before end January (overall dimensions: 335 x 157cm)
————————————
• Remove existing corner shower cubicle and fit new larger 1500mm full-width doors, low profile 1500 x 900 resin tray and replace old Triton Ivory II 8.5kw electric...
I’m looking for quotations to install a new package treatment unit for a new-build 4 bed house (with potential annexe) and associated outflow to either infiltration field, or to the dyke that runs alongside the plot.
The house will not be completed for some time, but in the interim the plant...
Any one have any experience at the cheaper end of the market, can't seem to find one below £100.00, would be nice to have a total flow over a period and current consumption, or am I asking too much?
After a long hard week I’m seriously thinking of taking on an extra pair of hands.
Anybody got any advice pros and cons on employing an apprentice ??
I’ve never done it before but finding it really hard going on my own at times especially when doing full heating jobs.
Tools end up in every...
Hi
I’m trying to put more pressure into my external oil combo boiler (heatslave ii 1825) but can’t ring the filling loop
The only thing I can see which looks like a braided pipe with 2 black valves is right at the back of the boiler so is pretty much unreachable. So I’m assuming that can’t be...
I am a small part time builder finishing a refurb on a very small terraced cottage in West Wiltshire/ Somerset border. The property is empty with a new gas supply. I need someone to fit a small baxi or ideal combi and five small standard rad and a towel rail rad.
I know folks are busy...
Hi,
How do I support with clips pipes run under a floating timber ground floor? The joists are too small to notch or drill into and in any case, there's plenty of space underneath. Where do you place the pipe clips if running perpendicular to the joists?
And if plastic pipes, this means lots of...
I have a hot water and cold water pump in the house for the bathrooms in a 3 strorey victorian house. the pumps are not stopping. can someone help. I am in SW116AB - Clapham
Been looking at the tilers forum UK Tiling Forum as I've been getting quite a few refurbs and can't find a decent tiler so been doing it myself. Got some good gear and although I'm not particularly quick, I do a good job.
Some of the blokes on there really have got a bee in the bonnet about...
We have various smells - usually sewage - coming from our bathroom occasionally. Sometimes every day then nothing for a week or two. It's a second/top floor flat and the smells come from the main bathroom wihch shares the soil pipe with floors below. We have checked all of the traps (sink, bath...
Over many years I have soldered pipes with either Poweflow or La-Co flux.
In the last year or so I have had spectacular, painful, itching and blistering whenever I do soldering work and it even seems to happen when wearing nitrile fronted, cloth backed gloves now.
Is this a documented thing? It...
Hi, Newly qualified plumber CnG level 2 here. Based in Devon. Ive been handy manning since last June and am now building up my plumbing skills in the real world!
Being in my mid 50's this is a bit of a leap of faith but I'm feeling positive about it all. Have done my own plumbing in the past -...
Domestic plumber new to the Cornwall area,no job to small,anything from washer change up to full bathroom install. Pm me.
About Us:
Gas safe registered and Green Deal Approved, Absolute Plumbing and Gas Solutions Ltd are a leading provider of plumbing, boiler and central heating services within Luton, Milton Keynes and Dunstable to domestic and commercial sectors. Most of our professionals have 25 years of...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 1
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
-
-
SPorcelanosa KRION Attica screen 1.2m, anyone?
- Started by Sebastian T
- Replies: 0
-
Cistern filling one third of the way
- Started by dwaindigital
- Replies: 3
-
Boiler losing pressure only on central heating- Started by SnosRap75
- Replies: 6
-
tanking. Is it ok to just seal everything with plastic.
- Started by Staggersandfalls
- Replies: 3
-
Pop quiz, does anyone recognise this radiator valve?
- Started by dimuc
- Replies: 4
-
SUsing coil to clear pipe leading to gutter
- Started by Sonya K
- Replies: 1
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-
-
-