Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Hey folks, I'm wondering if someone could possibly help, I'm looking for a possible part...
Hello everyone, It’s been a while. Happy new year.
I’m looking to replace a Britony 2t water...
Hi
I recently moved back to Europe from the Middle East and shipped my belongings. In that...
Hello ,
I have an Ideal Classic boiler ff350 which runs for 10 mins before the boiler cuts out...
hi there,
i have started my gas engineer course and so far really enjoying it, pipe bending and...
Hello,
I am having an on-going battle with my energy supplier trying to get a smart gas meter...
https://idealheating.com/blog/important-customer-safety-notice
Not very good from Ideal
Gas fire manufacturers state final connection to the 8mm service valve must be by using rigid...
I recently fitted a Viessman 222- f and used the weather comp sensor and vi- care app to control...
Hi,
I wonder if you could help me with your opinions please? I have two gas related issues. I'm...
Hello hope someone can help.
So this morning woke up to a f28 on my Vaillant eco tec pro 28.so...
I have just been round to a customers as they have fault on their boiler. Turns out they have no...
Hi, i was called to a worcester combi with a blocked plate exchanger it had a green slime inside...
Hi Guys,
Got a problem with a Baxi Solo 3 PFL50
The "pilot on" light is on permanently
It was...
My testo 300 today when commissioning a new install would only give a reading of 21.3% o2 for...
- Question
Hi. Does anyone know the cause and solution to the f34 fault on a ferroli?
The manual is saying...
I decided to inspect the inside of my Glow Worm Micron 30FF Flue by using an endoscope.
Can...
Evening
I'll go straight to it....
Ideal mini combi and non thermostat bath shower mixer.
Run...
Installed 2 days ago, Worcester 4000. Haven’t seen anything like this before, any thoughts...
Hi
I am looking to gain practical experience with a certified gas engineer.
I was in search...
Hi, I'ts been a while but its time to call on you guys for some help and payback with a...
Hi all,
The day before yesterday early morning (23rd of Jan) the temperature was very low...
Hi,
I had my new boiler and 13 radiators installed in July last year, but since installed all...
When you do the benchmark and it asks for the cold water inlet temp- Please settle this for me...
Hi Guys,
Have a customer who has a Potterton 80el and when running heating after a few hours...
Hi All,
I had a Viessmann Vidotens 200w combi boiler installed recently and there is a...
Hi all,
I'm due to fit a condense pump on a boiler install. I'd love an easy install.
The...
Hi, we've removed a balanced flue gas fire, and want to keep the hole in case we put it back at...
Just an update to anyone who was following the thread on this site: Tify to gas engineer, what...
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I...
Hi there
I have a Baxi Bermuda C5 fire with back boiler and want to replace the gas fire only...
Good morning all, just a quick one here and i was wondering if someone could give a little...
HI All,
Weird problem with an FS30 CDI, The boiler does not come on when demand for heat (LR...
We are considering buying a house which currently has a 20 year old Ideal Icos boiler, so we're...
Help required Baxi 105he. Boiler is 10 years old and has been a pain for a while now. Ch workes...
Hi Guys was wondering if someone could help me out with a Vokera compact 29HE. Had been called...
Hi, I have 15 year old Cannon Caniston gas cooker and when I turn the tap for the biggest burner...
Hi,
I currently work on new builds with very limited work on the repair, maintenance and fault...
Hello.
We live in the UK and have an open vent CH system with a tank in the attic.
Recently our...
I went to an ideal instinct were the hot water was cycling hot and cold. Upon inspection the...
Been out the trade now for sometime now, a little out of touch with the latested boilers.
I...
Baxi Solo 30 he, existing boiler in newly bought house for client. Condense trap replaced and...
This is a long shot-( this post was originally sent to StevethePlumber but I havent heard back...
Hi, thanks for any advice, I'm about to change the pcb on an alpha intec system boiler. The...
- Locked
A few days ago the Bosch engineer came to house to check the built-in frost protection in my...
Customer has a Main Multipoint BF that needs the diaphragm replacing. I'm attempting to remove...
Looking for a gas safe engineer to complete a boiler and cylinder install in Ringwood BH24...
Hi all, new to the forum. Ive come across a commercial plant room with around 500KW of boilers...
I need some advice…
Our gas meter is currently in the garage conversion and runs under the...
Tags
Newest Plumbing Threads
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 0
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 10
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 3