Discuss Condense pump pipe run in the Gas Engineers Forum area at PlumbersForums.net

Jennie

Gas Engineer
Messages
283
Hi all,
I'm due to fit a condense pump on a boiler install. I'd love an easy install.
The little plastic pipe from the condense pump obviously goes up first. But after that? Can I get away with a short (3m) horizontal run before I run it into the soil stack? Or would I be pushing my luck?
Advice much appreciated.
Jennie
 

Reply to Condense pump pipe run in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
236
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
310
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
335
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock