Discuss Zone valve - replacement head? in the Plumbing Zone area at PlumbersForums.net

Jennie

Gas Engineer
Messages
283
Hi all,

Does anyone know if you can replacement heads for this zone valve? And if so, can you replace the head only (without having to drain the heating pipes)?

Thanks

Jennie

IMG_3168.JPG
 

Reply to Zone valve - replacement head? in the Plumbing Zone area at PlumbersForums.net

Similar plumbing topics

I have a CH circuit on a 2 way zone valve. It’s a long circuit with 15 rads on it but rather than shutting down the last 5 rads in the circuit...
Replies
0
Views
322
Is there anyway of testing electrically with a multimeter or any other way. Of testing that when you turn a room stat up it is creating a demand...
Replies
7
Views
541
Afternoon Fellas If anyone has time to help with this snag it'd be much appreciated. We have a wet-floor system controlled by John Guest UH3 and...
Replies
2
Views
499
I have an older gas boiler HW heating system with a taco circulator pump for each zone that worked fine last season. When turning it on for the...
Replies
4
Views
478
We have UFH throughout downstairs. I have had one coil replaced. I have had the thermostats checked that they are linking to the correct...
Replies
8
Views
626
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock