Discuss Y Strainer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
Do these restrict flow at all? Someone has fitted 2 x 22mm strainers before a 3 bar shower pump and just wondered if they could be restricting flow (under normal use, not blocked with debris).
 
If there are now 2 different filters in a line then surely there will a slight loss.
 
If there are now 2 different filters in a line then surely there will a slight loss.
Sorry, bad explanation, so there's one on each cold and hot supply..
 
No (if anything won't be much )
 
Changed hose to a large bore hose and new showerhead and custard was happy ;) happy days.. Cheers lads
 
Status
Not open for further replies.

Reply to Y Strainer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
191
Good evening, Wondering if i could get a little guidance, I have a 3/8 plastic line running from a softener to a coffee machine (because...
Replies
1
Views
154
British Gas servicing the above boiler ramped up the boiler to maximum in the installer menu to do flue gas analysis. They also measured the...
Replies
4
Views
605
Hi. I'm currently estimating on installing a new shower pump to feed an existing bath/shower diverter. Hot side: fit flange and spherical valve...
Replies
29
Views
5K
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
378
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock